LeeD Posted March 3 Share Posted March 3 Hi all need help and advice please my Suzuki engine 660ss engine light as just come on, been for a drive and seems to be ok started the car a few ago no issues went to take it out this morning and the light will not go off ? any help or advice would be greatly appreciated. location near Salisbury thanks in advance Lee Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted March 3 Member Share Posted March 3 Which model? Is this the amber warning light, and is it on all of the time that the ignition is ON? The Owner's Handbook recommends an ODB scan. Jonathan Link to comment Share on other sites More sharing options...
LeeD Posted March 3 Author Share Posted March 3 Hi Jonathan, it’s the supersprint 60th anniversary model. Yes its on all the time and amber in colour, sorry to say I do not have a code reader and would not know we’re the port is and what to do as I am not that practical I am afraid Lee Link to comment Share on other sites More sharing options...
cdt123 Posted March 3 Share Posted March 3 As posted on your blog just now: Common ones I’ve heard are as follows: Apparently the 160 etc are quite voltage sensitive so benefit being on a trickle charger (that’s what Millwood told me when I had an engine light). Subsequently reset mine and it hasn’t come back since. Others I have heard are to do with the MAF sensor, or throttle body (hopefully not that one). The error I had was a voltage mismatch between throttle position and pedal. I think if it happens again to me I’ll try replacing the MAF sensor next. On another thread someone also mentioned a faulty ignition switch as the culprit. Do let me know if you find any different! 😊. Link to comment Share on other sites More sharing options...
CAT170 Posted March 7 Share Posted March 7 Did you find the cause and solution to your Engine Management Light problem? Link to comment Share on other sites More sharing options...
simon_h Posted March 7 Share Posted March 7 Buy a code reader and have a look. The codes are all standard ones and point you pretty well in the right direction. The obd port is under the grommet where the fuses are 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now