Gareth H Posted July 21, 2023 Share Posted July 21, 2023 I'm not sure if all cars have the same arrangement, but mine has a pin in the arm rest that should locate into a hole in the bodywork when the door closes, but of course it never seems to align properly, is there a hack for keeping them closed?ThanksG Link to comment Share on other sites More sharing options...
David aka Blue7 Posted July 21, 2023 Share Posted July 21, 2023 You have the posh arm rests fitted to your doors The only fix is to just use a bit of brute force to align the stud on the arm rest. Most cars have the standard strap and popper fitted at the rear of the door but it can be a hassle turning in the seat to secure it. David Link to comment Share on other sites More sharing options...
Benton Posted July 21, 2023 Share Posted July 21, 2023 Typically the doors drop over time due to their weight on the hinges, causing misalignment. If currently you can lift the door slightly and then the "popper" engages properly then that's the problem. You could try loosing the bolts on the door side of the hinge, clip the door into position and then re-tighten the door hinge bolts. Normally works for a while. Link to comment Share on other sites More sharing options...
Gareth H Posted July 22, 2023 Author Share Posted July 22, 2023 Thanks chaps Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now