Easimap logs - “ I Store and Error Sign Mismatch” message?

[Benton]

I've just swapped over lambda sensors since the previous one died.  

Now having recently acquired Easimap I've noticed I'm getting the above message appearing  on a fairly regular basis in the Lambda "Long Term Adaptive Status" field as opposed to what I assume is the normal "OK” message.

The "Short Term Lambda Control Status", "Lambda", "Oxygen A" readings all look OK, except when the individual log row shows the "I Store and Error Sign Mismatch" message in which case the default values for "Lambda" and "Oxygen A" are logged rather than their actual values.

The car runs absolutely fine on the replacement sensor as opposed to drinking fuel/kangerooing with the previous "dead" sensor.

Does anyone know the meaning/significance of the "I Store and Error Sign Mismatch" message, or is it just a hiccup in the communication/logging software?

 

 

[Dave Hardcastle]

Can't help directly, but have you considered contacting someone like Northampton Motorsport? They work with Caterhams & Easimap and are a very helpful bunch.

[Benton]

Thanks for the suggestion