jackb_ms Posted April 23, 2021 Share Posted April 23, 2021 Hello AllCalling owners of non SV who may have GT seat fitted.Could you check the widest dimension of the seat?I'm trying to understand if it would fit in a 21.CheersJack Link to comment Share on other sites More sharing options...
Andy Mac Posted April 23, 2021 Share Posted April 23, 2021 I have them fitted. I'll have a check in the morning. Link to comment Share on other sites More sharing options...
jackb_ms Posted April 24, 2021 Author Share Posted April 24, 2021 Thank you Link to comment Share on other sites More sharing options...
Andy Mac Posted April 25, 2021 Share Posted April 25, 2021 Hi Jack. They are 410mm at the front under you knees and 400mm at the widest point at the rear. I hope that helps. Link to comment Share on other sites More sharing options...
Area Representative Golf Juliet Tango Posted April 25, 2021 Area Representative Share Posted April 25, 2021 Jack,John Bell fitted Tillets to his 21, I think anything which fits an S3 will fit. Saying that the Tillet is tight in an S3. Link to comment Share on other sites More sharing options...
jackb_ms Posted April 26, 2021 Author Share Posted April 26, 2021 Thank Andy It looks like the 21 has a slightly narrower tub than a S3 by approx 20/30mm.Which mean it looks like the GT seat would not fit.Jack Link to comment Share on other sites More sharing options...
simon_h Posted April 26, 2021 Share Posted April 26, 2021 Would be surprised if they don’t fit as the normal seats are just s3 ones. That said the seat back on the gt looks quite wide so might be a squeeze, the frames underneath I was told are the same though so it might be an illusion.One thing that I remember of the gt seats is that I felt like I sat higher in them. Caterham always recommended lowered floors and I seem to remember in my 21 I felt the wheel and dash were a bit low so might be an issue. Link to comment Share on other sites More sharing options...
jackb_ms Posted April 26, 2021 Author Share Posted April 26, 2021 I have been conversing with Oxted, and they have some reservation as if it would fit or not.There maybe an issue with the width of the base and the rake.Jack Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now