CWilson184 Posted February 18, 2021 Share Posted February 18, 2021 Hi All,I've bought some DRE shiftlights that I will be fitting to my 2016 Academy car and am looking for the wiring diagrams to help me if anyone has a copy?Cheers Link to comment Share on other sites More sharing options...
Area Representative Golf Juliet Tango Posted February 18, 2021 Area Representative Share Posted February 18, 2021 You can see a selection of manuals here: http://www.caterham.dk/Assembly_Guides/These may have the wiring too. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted February 18, 2021 Member Share Posted February 18, 2021 I have a large collection of wiring diagrams, corrected wiring diagrams, Assembly Guides, Handbooks, Workshop Notices etc. Available to all Members: please send me a Private Message if you'd like the right ones for your Seven.Jonathan Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted February 18, 2021 Member Share Posted February 18, 2021 Private Message sent. Link to comment Share on other sites More sharing options...
Support Team andy_harries Posted February 19, 2021 Support Team Share Posted February 19, 2021 A note of caution - in fitting DRE shift lights to my 2016 roadsport (should be the same as a 2016 academy for wiring), on the unit I had to set the cylinders to 1 rather than 4 as it says in the instructions. Took me ages to work that out, thinking I had tapped the wrong wire. Worth considering when fitting! I'd try the 4 cylinder setting first, but consider 1 cylinder if that doesn't work. Link to comment Share on other sites More sharing options...
Area Representative Iain McCallum Posted February 19, 2021 Area Representative Share Posted February 19, 2021 I fitted these to my 2011 Sigma and these are the connections/instructions i used (to the back of the rev counter)Connections Red in the DRE to Green Green in the DRE to White with Black tracer Blue in the DRE to Black All the connections are in the multi-plug behind the tachometerSet the DRE to 4 CYLs but with Stall not activatedInitially I didn’t think it was working correctly because I couldn’t get the revs to display on the DRE (held down the UP button while turning on the ignition) eventhough it displayed 0000 initially it then went blank.Checked the unit by lowering the first light to come on at 2600 and this proved it was working correctly.Cheers Iain Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now