nic.day Posted January 26, 2021 Share Posted January 26, 2021 Had a bit of a clear out and found some bits.All prices plus postage and packaging Tried to add photos but the unique system was giving me so many issues I have given up. So I have photos of everything - shout if you want me to email them to you!!!3 - Helmet head restraint = £2011 - MONO leather 260mm steering wheel. drilled for removable boss but no leather pad = £75 Link to comment Share on other sites More sharing options...
Guy Lowe Posted January 26, 2021 Share Posted January 26, 2021 YHM re: Tonneau Cover Link to comment Share on other sites More sharing options...
nic.day Posted January 26, 2021 Author Share Posted January 26, 2021 And replied!! email on its way with photo Link to comment Share on other sites More sharing options...
Tom Scanlan Posted January 26, 2021 Share Posted January 26, 2021 Hi would like Spa centre mirror please Link to comment Share on other sites More sharing options...
simon_h Posted January 26, 2021 Share Posted January 26, 2021 Hi Nick I’ll have the master switch kit assuming it’s for a rover set up?Cheers Simon Link to comment Share on other sites More sharing options...
JonT Posted January 26, 2021 Share Posted January 26, 2021 Messaged about the petty strut. Link to comment Share on other sites More sharing options...
nic.day Posted January 26, 2021 Author Share Posted January 26, 2021 Email with photos sent Tom Link to comment Share on other sites More sharing options...
nic.day Posted January 26, 2021 Author Share Posted January 26, 2021 Message sent Jon about the petty strut Link to comment Share on other sites More sharing options...
nic.day Posted January 26, 2021 Author Share Posted January 26, 2021 Thats a good question - It was from when I had a Zetec car - I have no idea if there much difference (not considered that) I can send you photos if that helps Link to comment Share on other sites More sharing options...
simon_h Posted January 26, 2021 Share Posted January 26, 2021 I can’t say I’d be able to tell if it would be suitable or not from a picture. Is there a part number on the kit if it’s still bagged? The rover one is BS03K according to caterham site. They have several different ones based on each engine type. Probably cable lengths mainly but I don’t know Link to comment Share on other sites More sharing options...
nic.day Posted January 26, 2021 Author Share Posted January 26, 2021 I have the FIA kit in front of me now - no paperwork in there except for the the batch/job number which I guess is the packaging note (this is stuck to the eyebrow) and the Battery Switch diode in a seperate bag has SW903 on itSorry!! thats all the numbers on it Link to comment Share on other sites More sharing options...
simon_h Posted January 26, 2021 Share Posted January 26, 2021 Ok. I’ll pass for now thanks. Link to comment Share on other sites More sharing options...
Tiny Tim Posted January 27, 2021 Share Posted January 27, 2021 YHM re the mirrors. Link to comment Share on other sites More sharing options...
nic.day Posted January 28, 2021 Author Share Posted January 28, 2021 Morning Tim I have replied to your mail Link to comment Share on other sites More sharing options...
nic.day Posted February 4, 2021 Author Share Posted February 4, 2021 Last two bits left, any interest before they go on the dreaded eBay? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now