imperial brake pipe size?

[timb2117]

Hiya hoping for quick advice, 2004 K series supersport sv, original brake line reference 77210f. I am fitting some Jack Webb front calipers - hoping to get fresh braided lines made up locally, Jacks caliper end is an M10x1.0 easy - the inboard end that fits into the bodywork (photo attached) what is the designation/ type of thread please.

(Would like to get them pre made rather than wander in with the hose and wait for workshop to make them up.) 

[John Vine]

Thread is probably 3/8" x 24 but I don't know what the actual fitting is.  You could ask Goodridge who, I believe, do CC's hoses.

JV

[7 wonders of the world]

caliper ends are metric, hex fittings have a nick in the corners,  chassis are imperial 

[timb2117]

Thanks guys thats a bit more to go on.

[John Vine]

Would like to get them pre made ...

Available from CC as P/N 77209F, including the 1/8” BSP to M10x1.0 adaptor for the caliper.

JV

 

[timb2117]

awesome thankyou John, sort of half wishing I had been patient enough to await the full kit being in stock at Caterham, but tried to do so and then "back orders's" wallowed them up, all G and your help appreciated.