Anton Posted June 21, 2020 Share Posted June 21, 2020 I have a 2003 1.8K SVMy speedo has a digital mileometer which can be set to display trip or total mileage using a button on the face.Recently the display has stuck on 0.0 and no amount of button pressing makes any difference.Any ideas how to deal with this short of sending it away for repairs? Link to comment Share on other sites More sharing options...
SM25T Posted June 21, 2020 Share Posted June 21, 2020 As in failed ? Link to comment Share on other sites More sharing options...
Anton Posted June 21, 2020 Author Share Posted June 21, 2020 Ian - speedo works perfectly (I've got used to the 5mph high reading) but mileometer shows 0.0 most of the time, and occasionally pops back up to the full mileage. I didn't use the car for a month or so and when I restarted it was stuck on zero. During the lay-off the battery died despite being on a trickle charger - don't know if that had anything to do with it. Link to comment Share on other sites More sharing options...
JonT Posted June 22, 2020 Share Posted June 22, 2020 0.0 sounds like it's the trip reading. I doubt the milage has a decimal place. It sounds like the trip reset button might be stuck on so it's constantly resetting. Give the switch a good wiggle, or maybe spray with contact cleaner? Is it integrated into the unit or separate? If it's separate, maybe you could chance the switch? Link to comment Share on other sites More sharing options...
7 wonders of the world Posted June 23, 2020 Share Posted June 23, 2020 You should be able to get your speedo better than 5mph too, there;s instructions for all tyoes on heresomewhere but Ithink yours will havethe little dip switches on the rear..? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now