Bulkhead

[Brightonuk]

I went with m3 rivnuts and used all the existing holes bar the two at the base of the bulkhead (I could not be bothered to remove the bulkhead which I had to do to get the angle right for those two holes)

I ordered button head cap screws to secure the scuttle  I saw a couple of photos of people using finishing washers but that seemed overkill for me.

Now access to the spaghetti is much easier, the down side is now my OCD took over and I decided to eliminate unused switches to try to tidy up the wiring and route it neatly and perfectly spaced.

Which in turn means a new custom dash hence a request for an S3 dash template.

Funny how something so simple turns into a major project.