Ferrino Posted January 31, 2020 Share Posted January 31, 2020 For my Duratec 2.0 conversion (stock motor with Jenvey throttle bodies), I was wondering which injectors are typically used, please?By my calculations, 275cc would allow for up to 220BHP, so should give enough headroom for potential upgrades (I'm hoping to be at around 180 BHP to start with).Are there any particular injector models (spray patterns etc) that work well? I'll be using the factory injector location in the cylinder head. Link to comment Share on other sites More sharing options...
7 wonders of the world Posted January 31, 2020 Share Posted January 31, 2020 The Green bosch ones will take you up to around 330BHP so if your planning upgrades I'd get these to save buying two sets.Be careful where you buy from whichever you get as there are a lot of fakes around ! buy form a reputable source. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now