mcerbm Posted February 5, 2018 Share Posted February 5, 2018 After chatting to Racelogic at the autosport show it turns out that the HD2 can take an input from CANbus or an input from their micro input module which will take feeds from various sensors you can but aftermarket, but crucially not both. I was after rpm / throttle position which I can get from the ECU. However I also have a brake pressure sensor (well a position sensor that is mounted in the pedal box) that I would also like to log. Is it possible to input a sensor to the spare pins in the emerald so that the K6 can convert to CANbus and therefore I can get it into the HD2, if so does anyone know roughly how its done? Link to comment Share on other sites More sharing options...
Strangely Posted February 5, 2018 Share Posted February 5, 2018 Simon Hoade has done this and and talked about it on the "Caterham - TechTalk" group on Facebook. I don't know whether he's here as well... Link to comment Share on other sites More sharing options...
mcerbm Posted March 5, 2018 Author Share Posted March 5, 2018 Just to follow this up. I got some help from the post above and also from Emerald. I havent done this yet but my plan is to link in the sensor via a spare pin and use the MAP function to get it broadcast via CANbus. Link to comment Share on other sites More sharing options...
Area Representative Nick Bassett Posted March 7, 2018 Area Representative Share Posted March 7, 2018 Simon's not on here, but I know him and will make him aware of this thread.@mcerbm - did you want to pm me your email address? Link to comment Share on other sites More sharing options...
mcerbm Posted March 7, 2018 Author Share Posted March 7, 2018 Hi Nick, yes cheers that would be useful, thanks Link to comment Share on other sites More sharing options...
mcerbm Posted June 6, 2018 Author Share Posted June 6, 2018 manged to get it all working with help from Emerald.see link below for it all working in the HD2. I used the MAP function which is redundant and automatically gets sent via CANbus Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now