Molecular--Bob Posted November 16, 2017 Share Posted November 16, 2017 Hi AllAnyone have a copy of the Raceline Duratec wet sump fitting instructions, or a link to an online version? I can't find mine at the moment. Thanks Ian B. Link to comment Share on other sites More sharing options...
AdamQ Posted November 16, 2017 Share Posted November 16, 2017 From distant memory, it's one of those things where it looks like there are several possible ways of fitting it, but when one tries it can only be assembled one way.The only useful thing I can remember is that there are several O-rings that look similar but are different and fitting the pick-up pipe is a great deal easier with the correct O-ring ...!Sorry, probably not a great deal of help, but FWIW ...Adam Link to comment Share on other sites More sharing options...
Molecular--Bob Posted November 16, 2017 Author Share Posted November 16, 2017 Hi AdamFigured out the right o-rings for the oil pick up, it really doesn't move with the bigger one fitted, but not sure where the slightly bigger one is supposed to go? Link to comment Share on other sites More sharing options...
AdamQ Posted November 16, 2017 Share Posted November 16, 2017 I have a very vague and sketchy recollection that it might be related to the oil pump ...Again, apologies - you can't get much more non-commital than the statement above ...! Link to comment Share on other sites More sharing options...
John Vine Posted November 17, 2017 Share Posted November 17, 2017 I have Raceline's PDF. Send me a message with your email address and I'll forward it.Btw, have you seen this link?JV Link to comment Share on other sites More sharing options...
Molecular--Bob Posted November 17, 2017 Author Share Posted November 17, 2017 Hi JohnThanks for the offer of the PDF, I have messaged you with my details. Your post is very informative, thanks for the link. Ian B Link to comment Share on other sites More sharing options...
John Vine Posted November 17, 2017 Share Posted November 17, 2017 PDF on its way.JV Link to comment Share on other sites More sharing options...
Rattie Posted November 17, 2017 Share Posted November 17, 2017 I had to do this too. The PDF and John's posts were very useful. It's not hard, but it does take a while. Check the routing of your silicone bead a few times before mating and don't be either too stingy or apply it like a brickie ;)Good luck Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now