Superwhite R283 Posted May 7, 2017 Share Posted May 7, 2017 Where can I get a oil filter housing blank for the temp/pressure sender hole?Cheers Darren Link to comment Share on other sites More sharing options...
Wrightpayne Posted May 7, 2017 Share Posted May 7, 2017 I used a cut down bolt - same size as prop to diff drive flange (fine metric) though i believe there are two different thread sizes for the sender Ian Link to comment Share on other sites More sharing options...
revilla Posted May 7, 2017 Share Posted May 7, 2017 Darren, drop me an email to act as a reminder to have a look tomorrow, I'm sure I've got a couple in my spare nuts and bolts box ... I removed the blanks to install senders on three engines PS: Will reply to your other emails when I get a chance! Link to comment Share on other sites More sharing options...
revilla Posted May 10, 2017 Share Posted May 10, 2017 Darren,I've got these:The smaller one (Number 1) fits the little recessed ports which I have used for an oil temperature sender in the picture below with a bit of threadlock to seal it. The larger ones (Numbers 2 & 3) fit the larger sensor port on the bottom as shown. Number 2 even comes with a FREE copper washer Which one(s) are you after?Andrew Link to comment Share on other sites More sharing options...
Superwhite R283 Posted May 10, 2017 Author Share Posted May 10, 2017 Hi AndrewI'm not sure if it's 1 or 3, I'll have to have a check at the weekend and let you know. It's definitely one of them two.Thanks for looking :0) and thanks for the emails, super helpful as always :0)Cheers Darren Link to comment Share on other sites More sharing options...
revilla Posted May 11, 2017 Share Posted May 11, 2017 Let me know. If you're not sure I can post them both to you and you can let me have back what you don't use. Link to comment Share on other sites More sharing options...
Superwhite R283 Posted May 11, 2017 Author Share Posted May 11, 2017 Just checked, 3 please :0) Link to comment Share on other sites More sharing options...
revilla Posted May 13, 2017 Share Posted May 13, 2017 Posted today. Should be with you in a jiffy. Or some other brand of padded mail bag! Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted May 13, 2017 Member Share Posted May 13, 2017 :-)Jonathan Link to comment Share on other sites More sharing options...
Superwhite R283 Posted May 13, 2017 Author Share Posted May 13, 2017 Thanks Andrew :0) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now