Jig Posted February 1, 2017 Share Posted February 1, 2017 Hi allI've given up trying to be independent - I'm building a 310 and the manual is gibberish where the pipework is concerned. I've looked over a number of blogs but I am still uncertain as to which pipe is which and where they run. Does anyone have a decent diagram and/or pictures they could share with me at all, please? Mine is obviously a recent Sigma with a heater.CheersJerry Link to comment Share on other sites More sharing options...
Jim 123 Posted February 1, 2017 Share Posted February 1, 2017 I did my 270S, but have nothing legible that I can send you. If no one comes up with a diagram I can talk you through what goes where. Link to comment Share on other sites More sharing options...
K7 VCT Posted February 1, 2017 Share Posted February 1, 2017 Jerry, I have a 310, I could send pictures of the engine bay to your email if you send it to me.Cheers Julian Link to comment Share on other sites More sharing options...
Jig Posted February 2, 2017 Author Share Posted February 2, 2017 Thanks guys.@Julian: I have sent you a message with my email address.@Jim: I reckon I'll get you to talk me through the IVA process once I can see when I'll be finishing up, if that is ok?Jerry Link to comment Share on other sites More sharing options...
Jim 123 Posted February 2, 2017 Share Posted February 2, 2017 Get in touch if I can help Jerry. Meantime enjoy your build! Link to comment Share on other sites More sharing options...
nigelpugh Posted February 2, 2017 Share Posted February 2, 2017 this should help,you Jerry. Link to comment Share on other sites More sharing options...
Alan Reeves Posted February 2, 2017 Share Posted February 2, 2017 Nigel us that a sigma diagram graeme Wilding do you still have the 360 diagram, I will look tomorrow but... Link to comment Share on other sites More sharing options...
nigelpugh Posted February 3, 2017 Share Posted February 3, 2017 Yes that is for our Sigma engined Superlight Twenty Models Alan?I thought it was a Sigma he was building not a 360? Link to comment Share on other sites More sharing options...
Jim 123 Posted February 3, 2017 Share Posted February 3, 2017 Great diagram Nigel, I'm sure it will help lots of other builders. Jerry as your car has a heater, just to mention that you should take the hose from the "submarine" into the bottom heater connector. The hose from the rear of the "modine" goes into the top heater connector. You might also want to put a couple of turns of PTFE tape around the temp sensor before you fit it to the "submarine" as there is tendency for a slight weep to develop. Link to comment Share on other sites More sharing options...
Alan Reeves Posted February 3, 2017 Share Posted February 3, 2017 so right Nigel, I saw the 310 and got it wrong... Link to comment Share on other sites More sharing options...
Jig Posted February 3, 2017 Author Share Posted February 3, 2017 Cool, thanks everyone. Now that I have the fixings and can attach stuff, I reckon I can start cutting the pipework for a good fit.Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now