Jump to content
Click here if you are having website access problems ×

Rust protection (new build)


rockinroyston

Recommended Posts

Hi

Just a quick question re rust protection on a new build (before I bolt too many bits on...)

I've done:

Grot traps in engine bay with dintrol

dinitroled the inside of the de Dion tube

I know to do wings with underseal to prevent cracks

So other big ticket items:

Do I underseal the whole underside of the floor pan? would seem a good idea but it looks so clean & shiny...at the moment...

Do I underseal the Diff enclosure area? this would seem a good idea too..

propshaft tunnel?

I have my ACF 50 for the inner ali panels etc

Will varnish the wooden boot insert

These look like good tasks for my trainee pit crew... & will also distract me from the engine & gearbox project...

 

 

 

 

 

Link to comment
Share on other sites

Thanks, Hadn't really thought of doing the engine bay & quite like the Ali look, any pictures?

Also found this which would match the body work sort of... if I rolled it over in a ditch...

https://www.amazon.co.uk/Hammerite-Direct-Galvanised-Metal-Paint/dp/B00N4ZC2UO/ref=cm_wl_huc_item

I'll see what other feedback I get before I commence operations.

Link to comment
Share on other sites

I sprayed Dinitrol 3125 cavity wax all down the transmission tunnel, round the fuel tank and behind it, all over the diff/rear suspension area, under the floor and the engine bay sides. I then gave the floor a coat of 4941 black wax. It turned my nice new chassis into a brown slimey mess, but after almost six years and 28000 miles it's holding up pretty well.

Still don't drive it on salt though.

Duncan

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...