Nick T Posted November 27, 2016 Share Posted November 27, 2016 CLEAROUT mostly Xflow Super Sprint stuffFor sale, fits xflow supersprint unless otherwise stated. Re-advertised due to non payment (you know who you are)Collection from Hampshire (M27 J9) or may post, please enquireMoto Lite steering wheel with 7 center cap £35Facet fuel pump, kept as spare never fitted to car but I have checked it works £25Solid bottom pulley for x flow (not like the cheap pressed ford ones) £25 LOSTNew ford thermostat housing £30Spare wheel bolt £5EBC greenstuff rear brake pads £30Pair of areo screen mirrors well used £25Starter motor, good working order £25Lucas Alternator short type so will fit with 4 branch exhaust manifold needs regulator £15Radiator old style Xflow pinhole in bottom very easy fix £35Rocker cover gaskets, cork x 3 £10 - SoldMotorcycle 12v lighter socket bolted fitting (fitted under dash so no holes) £5Haynes Webber carbs book £15Haynes Mk 2 escort (x flow) £12Brake light switch hydraulic type 2 unused £10 each - SoldClutch cable new £25Throttle cable new £25 Link to comment Share on other sites More sharing options...
Drumster Posted November 27, 2016 Share Posted November 27, 2016 Nick,I'd like the hydraulic brake light switches if you're able to post please Link to comment Share on other sites More sharing options...
Nick T Posted November 28, 2016 Author Share Posted November 28, 2016 No worries will sort out at weekend. Can you send me a BM with details.cheers Link to comment Share on other sites More sharing options...
Drumster Posted November 28, 2016 Share Posted November 28, 2016 Link to comment Share on other sites More sharing options...
Guy Lowe Posted November 29, 2016 Share Posted November 29, 2016 Nick, is the stat housing this type?Guy Link to comment Share on other sites More sharing options...
Nick T Posted November 29, 2016 Author Share Posted November 29, 2016 Yes I think it is. I can sort you out a pic at the weekend if that helps.cheersNick Link to comment Share on other sites More sharing options...
NORTH KENT ARS Posted November 30, 2016 Share Posted November 30, 2016 Hi Nick,Second dibs please on the stat housing, if Guy decides not to take it.I'd also like the radiator if it is the old extra thick black painted brass type made by Covrad and in good nick apart from the pinhole. I had one with what I thought was a pinhole until it disintegrated on the Paris Peripherique at the start of a tour, which thanks to piss-poor RAC service cost me a fortune and saw the rest of the tour being covered in a Citroen diesel I subsequently found out that the older soldered brass cooling system components don't like the OAT coolant I had been using, which probably hastened its demise Crudders Link to comment Share on other sites More sharing options...
simon metcalfe Posted November 30, 2016 Share Posted November 30, 2016 Hi Nick, I'd be interested in the bottom pulley if still available please. Would you be able to post it to Ipswich? regards Simon Link to comment Share on other sites More sharing options...
simon metcalfe Posted December 1, 2016 Share Posted December 1, 2016 ..also, should have checked, it it in new condition? Reason I ask is I have an oil leak fm my crankshaft pulley. The pulley has some signs of a wear groove so need to replace with a new one.Thanks Simon Link to comment Share on other sites More sharing options...
Nick T Posted December 3, 2016 Author Share Posted December 3, 2016 Guy,yep looks like that, genuine ford part.BM your mobile and I will send you a pic if you like.cheersNick Link to comment Share on other sites More sharing options...
Nick T Posted December 3, 2016 Author Share Posted December 3, 2016 Hi Simon,Unfortunately my highly technical spares storage system, also known as in the garage somewhere has failed me at the moment and I cannot find it to check that there are no marks.I will have a better look tomorrow cheersNick Link to comment Share on other sites More sharing options...
Nick T Posted December 3, 2016 Author Share Posted December 3, 2016 CruddersThe rad is the old thick brass type. If your still interested, let me know.Cheers Nick Link to comment Share on other sites More sharing options...
NORTH KENT ARS Posted December 16, 2016 Share Posted December 16, 2016 Nick - you (should, if the website is behaving) have PM.Crudders Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now