AndyD Posted February 9, 2016 Share Posted February 9, 2016 Does anyone have an adhesive applicator gun for 2-part 50ml glue 1:1 mix ratio, like Bigbond, that I can borrow/have in return for postage costs? They're expensive new at £20 for a one-off job.Something like this or like this.I'm planning to use Bighead fasteners for my new cycle wings and the supplied glue needs an applicator like this.Thanks. Link to comment Share on other sites More sharing options...
Grubbster Posted February 9, 2016 Share Posted February 9, 2016 I've mixed up bigbond 2-part just by squeezing a bit out of each tube (same about) and mixing it like I would araldite. My tubes of bigbond actually came with a mixing nozzle that twisted on the front, but obviously can only be used once hence I've used the old fashioned method a few times. Link to comment Share on other sites More sharing options...
AndyD Posted February 9, 2016 Author Share Posted February 9, 2016 Hi Grubbster. Yes mat resort to your method as am not keen on paying 20 quid for a one-off job. Doesn't look like proportions are that critical either. Still hoping I can lend a squeezy gun as it'll make it easier. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now