mikecocker Posted May 31, 2015 Share Posted May 31, 2015 Standard push rod approx 3.5" long with 5/16" unf thread one end and domed head the other. I can find extended ones on line but not standard. Perhaps someone has a scrap m/c lying around in the garage. Thanks. Link to comment Share on other sites More sharing options...
Paul Deslandes Posted June 1, 2015 Share Posted June 1, 2015 I have an old standard master cylinder. No idea what state it's in but you're welcome to it for the cost of the postage, unless you want to pick it up from near Guildford Surrey.Paul Link to comment Share on other sites More sharing options...
Paul Deslandes Posted June 1, 2015 Share Posted June 1, 2015 alternative might be to buy one of the extended ones online, shorten it and cut a new thread to suit. Link to comment Share on other sites More sharing options...
mikecocker Posted June 1, 2015 Author Share Posted June 1, 2015 Postage would be great thanks Paul, Guildford is a bit far for me. I'll send you a message with details. I did think of cutting and rethreading a longer one, but the thread is formed rather than cut, so the rod diameter is too small for cutting a new thread. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now