Jump to content
Click here if you are having website access problems ×

Questions about Stack ST8100 wiring


Monte Busa

Recommended Posts

OK, so here goes - Stack UK has been completely unresponsive to multiple requests to help, so I thought I'd try you helpful chaps.  

I am currently re-doing the wiring system on my racer Supersport (Rover K Series, 1997) originally equipped with Stack 8100 instrumentation.  I have a head scratcher:

The system has a small black box (around 20mm X 20mm X 10mm) with a Stack label, and hand etched "1567" with an inline signal conditioning board and a Stack 4 way connector.  Is this an accelerometer, and if so, how should it be mounted?  It was mounted to the outside of a small aluminum box on the scuttle by the PO.  Here is a picture:http://i76.photobucket.com/albums/j24/Aric_Streeter/IMG_2226_zpsdfmreyna.jpg

 

Link to comment
Share on other sites

What's the exact model of your dash (8100 is the generic series)?  The model number is written on a label on the back of the dash unit.  This should enable you to look up the exact features for the model. My feeling is that it's a lap timing beacon but I'm only guessing  *scratchchin* 

Link to comment
Share on other sites

Here's the label...ST8100 (there is an actual model ST8100), might not be that much help...hmmm.  Also, it's not a beacon - the Stack in-car beacon receiver has a an IR eye and is shaped like a lipstick cannister...

http://i76.photobucket.com/albums/j24/Aric_Streeter/IMG_0589_zpsujaktpyh.jpg

 

 

 

 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...