AshleyBanks Posted June 8, 2014 Share Posted June 8, 2014 I have had to start using an old engine and am refitting all the bits back on. I have come to rifit the dry sump I have these bits (see picture below) that go into the sump. but as you can see the o ring is destroyed. Does anyone know where I can get a replacement should I use something else as well as the o ring like sealant or something on one or both parts? http://i1080.photobucket.com/albums/j333/ashleybanks1/IMG_20140608_153424_zps760605a9.jpg Another question do I need a gasket for the water rail? Link to comment Share on other sites More sharing options...
Jason Plato Posted June 8, 2014 Share Posted June 8, 2014 I found a replacement from caterham but I imagine its a std size that you could match at a good auto factors yes you need a gasket on the water rail > head . Link to comment Share on other sites More sharing options...
jackb_ms Posted June 9, 2014 Share Posted June 9, 2014 I went to my local hydraulic engineering company and they just gave me one. Do you have a "pirtek" branch close by? They usually quite helpful and have lots of various o-ring size Jack Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now