Neal Posted July 8, 2013 Share Posted July 8, 2013 Hi all Our newly-acquired Seven has Jenvey DTH bodies, currently with Pipercross "sock" filters. Induction side is rather loud, so thinking for next week's club trackday at Brands we may need to install the Bernard Scouse Airbox (using normal Caterham filter) that came with the car. Slight issue is that the soft material attached to the edge of the airbox (that would seal it against the backing plate) seems to have come away in places. Question is what to replace it with, as we would like the two filter systems to be interchangeable. As a quick and dirty solution I'm thinking of cutting the seal off where it's come away, and "perfecting" the seal with small pieces of duct tape or similar. Or would that be silly? Thanks Neal Link to comment Share on other sites More sharing options...
7 wonders of the world Posted July 8, 2013 Share Posted July 8, 2013 Mine had self adhesive foam strip about 6-8mm wide ISTR, which you can pick up from and DIY shed for sealing doors and windows Link to comment Share on other sites More sharing options...
Neal Posted July 8, 2013 Author Share Posted July 8, 2013 Thanks - will have a look at that. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now