elie boone Posted May 3, 2013 Share Posted May 3, 2013 Anyone has a manifold for a weber carb gathering dust for a 1100cc mini/glider engine ? The engine is not tuned but i have height issues with the std set up in this kit car. The carb i alredy have just need a manifold. Link to comment Share on other sites More sharing options...
Wrightpayne Posted May 3, 2013 Share Posted May 3, 2013 Which type of carb - side or down draught? Don't have one BTW! Link to comment Share on other sites More sharing options...
Area Representative skeetsy Posted May 3, 2013 Area Representative Share Posted May 3, 2013 I might have a swan neck style manifold for a single side draught DCOE kicking about somewhere if that is any use to you? All the best Richard Link to comment Share on other sites More sharing options...
elie boone Posted May 4, 2013 Author Share Posted May 4, 2013 Richard, how high sits the carb compared to the rocker cover ? if it's lower then yes i would take it depending on the price. Link to comment Share on other sites More sharing options...
Area Representative skeetsy Posted May 4, 2013 Area Representative Share Posted May 4, 2013 Hi Elie, I will take some measurements and photos and let you know, I don't have a Mini any more but I think I've got an old head lying around so I'll see what I can sort out. in terms of price I'll see what sort of condition it's in and let you know, but I wouldn't think I'd be asking more than £30.00 for it plus postage... All the best Richard Link to comment Share on other sites More sharing options...
Area Representative skeetsy Posted May 4, 2013 Area Representative Share Posted May 4, 2013 Hi Elie, I've offered the manifold up to the old head and I'm afraid it would bring the carb up above the rocker cover by a fair bit (20mm ish at the rear flanges) Sorry to have got any hopes up. All the best Richard Link to comment Share on other sites More sharing options...
elie boone Posted May 5, 2013 Author Share Posted May 5, 2013 Richard, no problem, it looks like i need a straight manifold then. Link to comment Share on other sites More sharing options...
elie boone Posted September 17, 2013 Author Share Posted September 17, 2013 Still after a staight manifold for a Mini / A series engine or a pointer to a manufactor of these. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now