dogvet Posted October 28, 2000 Share Posted October 28, 2000 Any ideas on how to remove the stuff when set to fibre glass? Thanks in advance. Link to comment Share on other sites More sharing options...
Nick Posted October 28, 2000 Share Posted October 28, 2000 What sealant? I used petrol for silicone adhesive which softened it, and I then scraped it off with a plastic spatula scraper thingy for defrosting freezers. Link to comment Share on other sites More sharing options...
tgracing Posted October 30, 2000 Share Posted October 30, 2000 Cornings do a silicone sealant remover, but I don't know if it's usable on F/G (although that's what most baths are made out of). Other than that just use a straight edge like a credit card. One of the wife's cut up should be ideal wink.gif Davebo C7 CAR Link to comment Share on other sites More sharing options...
Pierre Gillet Posted October 30, 2000 Share Posted October 30, 2000 You mmena from a fiber glass wing for example? I mean "painted "fiber glass? If it is the case, you may want to try the special degreasing (detergent)liquid that is sold to clean up before being spraying with auto paint. Pierre Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now