Phil Morris Posted September 17, 2012 Share Posted September 17, 2012 Does anyone have lying around an old 5 Speed Gear Lever Extention (a couple of inches I think they are?) they no longer require? Thanks PHil Link to comment Share on other sites More sharing options...
OliverSedlacek Posted September 19, 2012 Share Posted September 19, 2012 I didn't think there was such a thing as an extension for the 5speed gear lever. Link to comment Share on other sites More sharing options...
Fishy Dave Posted September 19, 2012 Share Posted September 19, 2012 Phil, do you mean the thread convertor which is about an inch or so in length iirc? Link to comment Share on other sites More sharing options...
Mankee Posted September 19, 2012 Share Posted September 19, 2012 I would assume this part. Link to comment Share on other sites More sharing options...
Phil Morris Posted October 3, 2012 Author Share Posted October 3, 2012 Hi Guys. Yes thats the one! Thanks Phil Link to comment Share on other sites More sharing options...
Drumster Posted October 4, 2012 Share Posted October 4, 2012 Phil, I have something very similar, i.e. it looks identical save for mine has a few more threads. Also 2 of the threads have been flattened where a grub screw has held a gear knob in place, but I'm sure with a bit of fettling it will be fine. Let me have your address and I'll pop it in the post if you're interested. Link to comment Share on other sites More sharing options...
Phil Morris Posted October 4, 2012 Author Share Posted October 4, 2012 Chris YHMail, cheers, Phil Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now