Keechy Posted March 25, 2012 Share Posted March 25, 2012 First blat today after the winter overhaul, lots and lots of new bits. Unfortunately seemed to have picked up a rattle/aero noise at around 75-80mph. At the moment i am thinking it is the new carbon front arches flexing or vibrating. Anybody had any issues when fitting carbon front arches? Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted March 25, 2012 Share Posted March 25, 2012 Are they bolted or bonded ? If bolted, consider soft washers either side of wing ? Mine are bonded - with loads of black SikaFlex. Link to comment Share on other sites More sharing options...
Keechy Posted March 25, 2012 Author Share Posted March 25, 2012 Mine are also bonded but they could be rattling on the wide plate on the wingstay where the Allen key bolt holds the arch. Before I go out again I will apply some silkaflex on that wide plate to see if that sorts it out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now