Roger Ford Posted January 16, 2012 Share Posted January 16, 2012 Can anyone confirm that the harness bolts (on an imperial S3 chassis) are 7/16ths UNF? Link to comment Share on other sites More sharing options...
CharlesElliott Posted January 17, 2012 Share Posted January 17, 2012 Lost the assembly guide again? From the mounting kit supplied with the harness, assemble a 7/16" UNF x 1 3/4" bolt, plain washer next to the bolt head, crinkle washer and pass through the broad shoulder strap and through the bush. Ensure the step in the bush is closest to the bolt head. Screw the bolt into the harness mounting point. If the FIA roll over bar has been specified, this must be fitted prior to the shoulder straps, Fig 6 refers. and To fit the inboard lap strap. Assemble an 7/16" UNF x 1" bolt, plain washer next to the bolt head, crinkle washer, pass through the inboard lap strap and through a bush. Ensure the step in the bush is closest to the bolt head. Insert the bolt into the threaded boss and tighten to 45 lbft (61 Nm). Fig 8 refers. Ensure lap strap buckle is uppermost. Edited by - CharlesElliott on 17 Jan 2012 00:03:25 Link to comment Share on other sites More sharing options...
Roger Ford Posted January 17, 2012 Author Share Posted January 17, 2012 RTFM? What do you think I am, a girl? Link to comment Share on other sites More sharing options...
Irrelevant Posted January 17, 2012 Share Posted January 17, 2012 Confirmed. In fact, pretty much all cars use the same thread size. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now