The Pikey Posted February 20, 2011 Share Posted February 20, 2011 I could do with knowing what the gap is between the tyre and stay across the tread. can anyone help? thanks in advance Jason Link to comment Share on other sites More sharing options...
Lee Fowler Posted February 20, 2011 Share Posted February 20, 2011 I can look tommorrow as I am just about to fit Race Stays and Carbon wings. What is it you want to know exactly?? Lee Link to comment Share on other sites More sharing options...
Lee Fowler Posted February 20, 2011 Share Posted February 20, 2011 I think it will only aprox as the tyres on my car are not that new but from memory its about 1.25 inches maybe 1.5 inches. Link to comment Share on other sites More sharing options...
The Pikey Posted February 20, 2011 Author Share Posted February 20, 2011 Hi Lee I have some CSR style wings and to look any good they need to be really close to the tyres. If I measure from the centre of the tread to the underside of the bar that the cycle wing glues/screws to I currently have 70mm and I could do with it being 30ish mm. I really don't want to go to the trouble of cutting these down so I'm hoping the "race" type stays will be OK. thanks Jason Link to comment Share on other sites More sharing options...
Lee Fowler Posted February 21, 2011 Share Posted February 21, 2011 Measured at aprox 50mm. Lee Link to comment Share on other sites More sharing options...
The Pikey Posted February 21, 2011 Author Share Posted February 21, 2011 Lee thanks very much for doingt that. Looks like I'll be getting the hack saw out :-( Jason Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now