ccconn Posted February 3, 2010 Share Posted February 3, 2010 Thinking about changing to a mechanical sender and rang Think Automotive Only thing is I need the thread and pitch size for the sender Anyone any ideas Its a 2000 car VVc engine all help gratefully received Chris Link to comment Share on other sites More sharing options...
spannermcmlx Posted February 3, 2010 Share Posted February 3, 2010 Should be M12 x 1.5 but you get both in the kit. Sure someone will be along to confirm/correct shortly. Think it changed post 98 Ballistic R300 here Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted February 3, 2010 Share Posted February 3, 2010 It should be M12 at that vintage. The sender I have on my desk appears to measure 1.5mm pitch. The thread size is stamped on the face of the CC Caerbont sender (the face next to the spade terminal). The sender will be 1/8" NPT ..... this fits into an adaptor that has the M12 thread. Link to comment Share on other sites More sharing options...
ccconn Posted February 3, 2010 Author Share Posted February 3, 2010 Thanks have ordered a kit from Think but they have suggested to fit the t piece on the back of the oil filter rather than remotely Will this be ok? Link to comment Share on other sites More sharing options...
spannermcmlx Posted February 3, 2010 Share Posted February 3, 2010 Try this here fitting t piece direct will work but will leave you with a spare pipe unless you didn't order it Ballistic R300 here Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now