andrew_r Posted December 7, 2009 Share Posted December 7, 2009 Hi, I am building an R400 and the nylon adjuster on the handbrake cable slips when I pull the handbrake on hard. Any ideas how I cure this, do I need to change the cable because it's faulty. Thanks in advance. Andrew Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted December 7, 2009 Share Posted December 7, 2009 Silly question ... but assume you have tightened the locknut part of the adjuster up against it ? Maybe you didn't realise there were two parts and the other bit is lurking down the bottom end of the cable ? Or the locking part is missing ? Edited by - Stationary M25 Traveller on 7 Dec 2009 09:11:39 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now