kenny. Posted April 24, 2009 Share Posted April 24, 2009 Manual gives quite a large tollerance on this. Is there a definitive measurement used? i.e. from bottom of rear wing to centre of light and from body to centre of end of light. I've already checked with one lads car and both sides are different. Cheers, Kenny Edited by - kenny. on 24 Apr 2009 12:16:58 Link to comment Share on other sites More sharing options...
DohNut Posted April 24, 2009 Share Posted April 24, 2009 Limiting dimension is vehicle lighting regs, ie height from ground (when laden?) In practice unless you are going for an SVA it will be done by eye ( which are sometimes wonky ) Link to comment Share on other sites More sharing options...
IKB Posted April 24, 2009 Share Posted April 24, 2009 I have two build manuals and they both state "the rear wings are marked with two dots that give the position for the rear lights". If you have bought some carbon fibre jobs then the manual does give you some considerable latitude ie 350mm to bottom of fitting and 1500mm to the top. Guess you need to look at a few together with tape measure. Link to comment Share on other sites More sharing options...
kenny. Posted April 24, 2009 Author Share Posted April 24, 2009 Cheers guys. Don't suppose anyone could run a tape over them for me and I'll go with that. Cheers, Kenny PS No SVA required. Link to comment Share on other sites More sharing options...
IKB Posted April 25, 2009 Share Posted April 25, 2009 Kenny. Mine are 500mm from ground level or 175mm from the bottom of the rear guard (measured to the bottom centre of the fitting). Link to comment Share on other sites More sharing options...
john g Posted April 26, 2009 Share Posted April 26, 2009 Kenny , pop round and have a look. Link to comment Share on other sites More sharing options...
kenny. Posted April 26, 2009 Author Share Posted April 26, 2009 Brunel cheers, did it to your spec John G, what the bloody hell are you building at your place?........I thought the building industry was in turmoil, but it doesn't look like it judging by all that scaffolding 😬 Kenny Link to comment Share on other sites More sharing options...
john g Posted April 27, 2009 Share Posted April 27, 2009 Kenny, you don't want to know. I lost, SWMBO won! Will I ever get my R300! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now