webber 45

[Trotsky]

The bracket inside the air filter that holds the outer plate on the formost webber has come adrift at the top causing it to wobble a bit, is it fixable or do I need a complete new assembly, cheers

 

Trotsky N7 HPC

[elie boone]

It's the one with the single bolt i guess, yes you can have it welded.

I am not sure if that version is still available new.

[Graham Sewell]

You could probably try to get someone to weld it back into place.

 

From what I can see, the older single screw filters that had this sort of bracket were discontinued a while back and the new ones have two screws. So if you need to replace them, you'll probably need two!

 

Cheers,

 

Graham

------

Low tech luddite - xflow and proud!

[Normans_Ghost]

Trotsky, seeing as your name is tha same as my grandfathers friend, if you can't get it welded then email me. I may be able to find one for you.

 

 

 

^{Norman Verona, 1989 BDR 220bhp, Reg: B16BDR, Mem No 2166, the full story here}

You and your seven toThe French Blatting Company Limited

[millsn]

This may suprise you but I wrote to K&N (who BTW have a position that their filters should last the life of your car) and they sent me a new set of what I would call front plates. I was able to reference the exact date and transaction where I bought them though. Could be worth a try.

 

UK.SALES@knfilters.com

 

Edited by - millsn on 24 Apr 2009 18:23:30

[Trotsky]

Thanks all, I have a couple of mates who are metal fabricators so will call in a favour or two and see if i can get em sorted.

 

Trotsky N7 HPC