Jump to content
Click here if you are having website access problems ×
  • entries
    5
  • comments
    6
  • views
    22

New 360R SV

Jonathan T

Entry posted by Jonathan T

1,751 views

 Share

What a way to start a week!  My 360R kit is now (almost) installed into its build location.  No shortages reported either.  The Exocet red paint is looking good too.

RHS wishbones and suspension unit installed, but unfortunately the LHS wishbone is too tight to get the suspension unit installed.  One email later and a new wishbone is on its way.

 Share

4 Comments

Recommended Comments

Dorset7

You may need to file a little powder coat of the suspension mount on the wishbone - I had a similar issue when installing new items on my car.

File a little powder coat away from the mounting point, apply plenty of copper grease and use a punch / phillips screwdriver to line up the holes. You might have to gently tap the mounting bolt through with a soft faced hammer - plenty of grease is your friend here!

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...