Jump to content
Click here if you are having website access problems ×

Garf

Member
  • Posts

    77
  • Joined

  • Last visited

Posts posted by Garf

  1. My 1.4SS engine is currently apart having it's big end bearings replaced (again!) after a spirited handling event. It already has the foam removed and oil pick-up mods.

    I have decided it's time to add an Apollo oil/air separation tank but can't source from the usual places. If anyone has a full kit going "spare" then please blat mail me.

    Happy to collect if near Essex or will pay for a Hermes home collection to simplify things in current times.

    Fingers crossed .... Neil

  2. Ian - 7" with the original reflectors and lenses from 1995 (with a quick polish inside).

    I should add that the non-LED was also a Phillip's Extreme 140% bulb ....so even more impressive! You can actually rotate the LED bulb in its plastic holder (which itself slots perfectly into the reflector housing) in case you need to adjust get the horizontal alignment (there are placement notches as you rotate but I didn't need to).

    Neil

     

  3. Just for Jonathan (and of course others who are interested...) below are some amateur pics of the Dave Gemzoe LED's per John's post #4.

    It wasn't dark at the time nor a scientific test but more of an "alignment aid" process - however you can see how brighter they are and how well they cut-off on dipped beam (similar pattern to the original H4 bulbs) to avoid glare to on-coming vehicles. At night they are much more impressive *cool*

    Dipped beam:

    20190819_195959.thumb.jpg.387a4361846efc00bd5a4647cf1879c0.jpg

    Main beam:

    20190819_200012.thumb.jpg.2751742b0626982fa9b88b1ee3bcac91.jpg

    Neil

  4. My understanding is all k series have same dipstick length as all have same low sump. Mine is metal with yellow bottom with min/max hatch area but is apparently not the correct original one.

    However it has a notch on the metal where the max should be at 412mm from top edge and min is at 432mm. If you have an all metal one then lightly "crimp" yourself some notches.

    When I looked in the archives a while ago there were several comments about if the pgm ones were right or not ....

    Edit to add these measurements are for a wet sump!

  5. That may well be the going rate now.

    For my Mini Cooper S with twin carbs I've had 2 garages quote this week £100 per hour and they said it would be 2-3 hours time depending on how much adjustment is required.

    Both are with the famed A series guru Pete Baldwin on rolling roads.

  6. I changed all my k series hoses at the start of last year - used SFS (Lee Smith) and they were excellent had a slight issue and sorted very efficiently with no drama.

    I ordered regular kit for my engine with heater (explain type e.g. clayton as hose positions/lengths can differ!) but also extra bespoke length hoses as I was doing the coolant mod at the same time (changing the submarine tube). Don't forget to get the right type of stainless clips which they can provide.

    Oh ....and they gave the discount as per original bulk buy to members *thumb_up*

    Neil

  7. Hi Phil - been trying to connect with you via several Blatchat PM's but you may not have checked there for a while .... so hoping this thread auto contacts you .... please read and respond per my request.

    Ta - Neil

  8. I'd agree with the assessment above and it is the inlet manifold gasket.

    I had this fail in my 1.4k ss a few years ago - it was a bit more sudden than you and happened while driving thus producing a large white cloud which was effectively steam (key point it was white and not grey with oil burning). I stopped immediately and got a tow home - no additional damage.

    As others have said not a difficult (or expensive) repair. I hope this is all yours turns out to be.

  9. My tuppence .... many years ago I had a crank position sensor do funny things with the revs when the engine got hotter. Took a while to pin-point but changing it sorted it out (after doing the coil first) - maybe it was already breaking down and some resistance changed when hot.....

    Anyway after more recent CPS related irregular starting issues these last weeks (and improved electrical knowledge) I suggest you check the following on the CPS:

    1) Resistance - should be 12,000 - 14,000 Ohm  (recent non-starter was 0.022 Ohm and problem fixed with new one *smile*)

    2) Voltage on cranking - mine was about 0.35V which was deemed normal

    Hope you get there as appreciate the pains of having an electrical issue - mine is 1.4K SS on EU2 *thumb_up*

  10. I bought one of these BoPower D30 after lots of research.

    I wanted one that would also cope with a 2.0 diesel as well as our other smaller petrol cars so i went for one with 13600mAh and peak 500A and had an LCD to display charge level vs lights (it also had a decent and clear manual unlike the reviews of many others).  Due to spec I was after it's not the smallest but by no means big or heavy but does have a great hard case for all parts.

    There were less reviews on the Amzn .co.uk site but lots more on the .com.  I have tried it and yes it works *thumb_up*

    I did find that some do look very similar but with different Chinese badges and those that had stories of combusting on charging or melting on use (probably due to turning for too long or too quickly which the manual clearly explains) I avoided!

  11. @ Mark w - thanks for the thought but I was after the polished set (and hopefully the matching fog/reverse if interest grows).  Hopefully someone else will jump at your offer.

    @Phil - i sent you a Blatchat PM .... not sur eif it arrived as I got both a sent confirmaiton and administrator error message at the same time..... is your mailbox perhaps full?

  12. Currently changing my hoses to silicone and performing the K series mod from Sep 2012 LF - I also removed the thermostat to see 1) what temp it operated at and 2) if it had a hole in it (and what size).

    It was a 86 degC and had, to my surprise, 3 x 4mm holes in it!! *confused*  The car is 1995 and was raced back then - I understand some race ones removed the thermostat (i'm the 4th owner but this could still be original one to keep race temp down).

    Decided to fit new QH 82 degC and with only 1 x 2mm hole.

    My question is what would the effect be of so many holes?

    I'm expecting that it would have taken a long time for the engine to come up to temp (maybe it did but I had no reference.....) and in winter maybe not hot enough.

    I haven't driven it for a few months (other winter project work on suspension/frame) but actually recall a good but high running temp (can't be sure how long it took to reach it) but that it would quickly heat up further once stopped and cooling & fan cutting in later than I would like (since checked the old thermostat and it actually opened at 94 degC about when the fan cut in so not an ideal balance).  On the plus side no airlocks! *wink*

    20170306_080814.jpg.7da295f6fe8a52f2555454b249aafe9f.jpg

  13. Just back to the original topic (but glad to hear the problems are getting sorted).

    I also did the same this Jan/Feb ... like you in situ but I used Hammerite Satin Smooth paint. I also kept the top of the lower wishbone as neat and polished it up a bit (can't be seen in the pics) but the top one just didn't want to come up the same so remained black.

    Problem is as I'm now replacing the hoses for silicone ones at the moment and i have good access inside the car so now painting a number of rusted areas of the frame ... 1995 1.4K SS .... so needed it! 

    20170128_112511.jpg.9d5f248a12f693caaa3487cc7637ac85.jpg

    20170129_224831.jpg.b2ed6a8b11695c024646347d05a2c990.jpg

  14. I'm after some real life experience of using light (esp. yellow) silicone coolant hoses and how well they keep clean.  I need to change my rubber hoses this year and fancied going for yellow silicon as I have a yellow car.

    I have been given some feedback from a manufacturer to avoid yellow as they will soon discolour due to oil/other stains ..... even from normal road use. To keep the colour fresh would require constant cleaning almost after each drive (possible but unlikely to happen!). Not sure how quickly some oil residue might stain......

    The other feedback was that the coloured coolants (e.g. pink) will discolour through the hose within 6 months....

    Recommendation was to go with darker colours - so if yellow is agreed to be a bad choice then I may go red.

    I don't need specific supplier advice (I've done all the searches thanks) unless someone knows of a manufacturer who guarantees that external oil stains will not affect their hose.

    Ta - Neil

×
×
  • Create New...