Tiny Tim

I'm also looking at staying near the circuit on the night before. Does Guyers House or the Best Western have parking suitable for a trailer?

PM sent. 

Hi Jonathan, is the scuttle still available? Also do you still have any of the 53/4" headlights left? Thanks. 

YHM re the mirrors. 

I have a pair of 7" chrome headlamps in very good condition in the garage having just replaced them with

5 3/4" units. PM me if you are interested.

Tim

Looking for a pair of standard Caterham mirrors. Anybody got a pair lurking in the garage?

Thanks

I think I have got a standard roll bar from a 1996 S3 De Dion chassis in the garage. Would that be any use?

Tim

Have sent mail.

Tim

Looking for a Caterham rear badge as fitted to Rover engined cars from around 2002 onwards. 

Caterham am part no. SKU: 76254

Thanks,

Tim

Is it carbs or injection? I think I have one from when I was on carbs.

Tim

Simon, may be interested in the ITG filter but will have to check measurements.

Tim

Hi Richard,

Do you have any left for a S3 (2004)?

Thanks Tim

Edited by - Tiny Tim on 7 Dec 2013 22:33:07

James,

I have one off of my HPC which had twin DCOEs. No longer required as I have changed to injection and fitted a new bonnet. Mine is in VGC and is blue with a silver stripe. Was going to put it on BC for sale at £100. Let me know if you are interested.

Tim

Seven Goes Mad in Dorset

Simon,

I would potentially be interested if you can come up with a working solution. I have these on my HPC and they are next to useless.

Tim

Seven Goes Mad in Dorset

Cliff,

I have just done mine with packing material from Powerspeed. It is long strand e-glass in bags. Just had to put the right number of bags (4 for mine) that according to Powerspeed will burn away in use.

Are you coming on Tuesday?

Tim

Seven Goes Mad in Dorset

Mic,

Are the rears for 'through' or 'under' the Dedion mounting?

Tim

Jonathan,

YHM

Tim

Seven Goes Mad in Dorset

Jonathan,

I could be interested in one of these. Whereabouts are you in Oxfordshire?

Tim

Seven Goes Mad in Dorset

Dave, yes it is quite a tight fit

Seven Goes Mad in Dorset

Might seem a silly question but has the filler cap surround been fitted the right way up 🤔

I recently bought an aero filler cap and pipe as part of my upgrade to throttle bodies and the filler cap surround has four cut outs which can be seen when the centre cap is removed. One of the cut outs is bigger than the rest and must be fitted at the 12 o'clock position. This allows the collar on the fuel nozzle to go in.

I have both the aero filler cap and the pipe with the flap still fitted and have (so far!) no problems with filling up either in UK or France.

Seven Goes Mad in Dorset

Thanks Roger

Seven Goes Mad in Dorset

Anybody know a part no. for the expansion tank cap on a VX HPC? (Rectangular type tank). Something I can get from halfords or a local motor factor if possible.

Thanks

Seven Goes Mad in Dorset

BTTT

Seven Goes Mad in Dorset

Rik,

YHM

Tim

Seven Goes Mad in Dorset