PTC

Perfect! Only thing is its a Lotus chassis hence no steel in the tunnel. But from the pictures i can see if i can make a piece of sheet metal riveted to the tunnel to fix the remote lever. Email adress: PeerClausen@bluebottle.com BR, Peer

That sounds perfect! Do you have a picture of it ? Cheers, Peer

Hi Everyone, I am in desperate need of a remote linkage for my 4sp Escort Sport gearbox. BR Peer

Hi Everyone, I am in desperate need of a remote linkage for my 4sp Escort Sport gearbox. BR Peer

I have four JA Pearce magna wheels (13" 5.5 and 13" 7.5) but i need a spare wheel! Does anyone have any knowlege of where to find these rare wheels Merry Xmas

Hi, I am thinkin about lightening my flywheel in the turning) lathe on my XFlow. Does anybody have experience with this and how much can be taken off? Thanks Peer

I have a DWG file of the chassis! Send me a mail on PeerMaria@webspeed.dk and i will send it to you! BRG Peer

I have a DWG file of the chassis! Send me a mail on PeerMaria@webspeed.dk and i will send it to you! BRG Peer

Hi, Does anyone know what type of rivets i should use for repanneling my seven. The big issue is galvanic corrosion: Aluminium rivets are structurally the most sound solution but the worst with respect to corrosion. Aluminium rivets will be better in spreading the load over more rivets hence more sound structurally (bacuse they are softer). Monel rivets are best in corrosion but gives a very rigid (hard) connection to the frame. The Monel rivet is far to strong in comparrison to the bearing strength of the panel itself. Any advise or experience is very needed!!! Thanks Peer

Steve, No for the harness you can use whatever you have. But in general a 8.8 bolt is more reliable since it will deform before i breaks while the 12.9 will break without warning. Do you know what grade the suspension bolts are, both front and rear ? BR Peer

In my opinion 8.8 is good enough for the job. 12.9 are likely to brake due to fatique and therefore not to trust. Anyway the bolts carrying the harness are not highly loaded hence a ductile 8.8 is the best choise Peer

Hello, Does anyone know the colour code for the original lotus series 2 chassis ? Thanks Peer

I got the 1600 Xflow Peer

Thanks, The frame is the original S2 frame. So if i make my own brackets it should be possible is that right ? Peer

Hello, Are there any problems in fitting a Ford Escort sport gearbox to a series 2 lotus seven? Peer