nutty7

Hi Nick PM sent

Hi Nick I will take them both. Paul

Car is looking good Tony, new paint job?

Paul #6

The other consideration is that they are directional, 50/50 chance of being correct.

I have recently purchased a Radtec radiator very pleased with the product and they did discount for being a club member.

Mail sent.

Hi, could you please send some pics, do you have the Caterham roller barrel throttle bodies with the bonnet cut out.

NTDWM  https://racecarsdirect.com/Advert/Details/94155/sherwood-engines-23-ford-duratec-complete-eng

I used the Burton one REVFSS when mine failed and couldn't find a direct placement. You will also need to change the adapter REVT9-A as the sensor thread differs.

The replacement does have three wires power, signal and earth you will need a multimeter to determine each one.

I then cut the connector off the old sensor and soldered the power and signal of the new sensor to it then plugged the connector back in.

The earth wire was then screwed to the chassis close to the sensor. Though someone may have a better solution.

It works and is a cheaper replacement.

Nutty

Hi YHM regarding wheels.

Not now required as I've bit the bullet and bought new.

Hello, I am still looking for any of the above items.

Maybe a bit late but due to last minute unforeseen work commitments I have 1 ticket available. 

Miffed I can't make it.

Hello. 

 I am looking for a windscreen (black surround) with/without stanchions (black) and side screens, if by any chance someone is looking to sell please let me know.

Sorry for the delayed response.

 Yes all sorted I copied Antonio's thread  advice. 

Cheers Jonathan, somehow I missed that. 

Thank's Jonathan, do you think this one http://www.burtonpower.com/catalogsearch/result/?q=speedo+sensor would be a straight swap.

Hi, does anyone know where I may purchase one of these Caterham are out of stock.

https://caterhamparts.co.uk/senders/1008-speed-sensor-gearbox.html

Hi Rob

Are the stickers one size only or could you produce larger ones, say 3 or 4 x the size.

Paul

Still available. 

YHM 

An early BJ Car trailer that has been covered.

Twin axle just had new brakes shoes all round and 2 new brake cables also fully serviced and repainted underneath with hammerite.

Dimensions: Width 1.85mtr Height 1.34mtr Inter Length 4.20mtr

The trailer will accommodate my Freestyle 7 that has the SV De DIon rear, though is quite tight.

Trailer is located in North Lincolnshire. I can deliver at £1.00 per mile.

Price £1550 ono

I can send larger pics if required.

 Paul

On your pics it clearly shows grinder marks on the casing were the flange has been removed, i'm not familiar with this gearbox but would think that this is the obvious cause of chassis contact.

BTTT.