Bert320

Any interest at the reduced price?

Hamilton Classic 4.5m x 3m, Semi-pro paddock shelter / marquee in black.

Complete with 4 sides, 4off 5mm thick, 300mm square aluminium chequer plate floor plates and ratchet straps.

Same as this: https://hamiltonclassic.co.uk/collections/shelters-and-marquees/products/4-5x3m-marquee

Very little use, I think the sides have only been fitted once, and in very good condition all round.

With the accessories, this would cost around £750 new.

Looking for £400 or nearest offer.

Collection only, located near Belper in Derbyshire.

Cheers,

Rob

Can anyone confirm the thread size and cone angle for wheel nuts used on the anthracite eight spoke wheels?

Any recommendations where to buy black wheel nuts?

Cheers,

Anyone got a set of 4 Anthracite wheel centre caps no longer needed?

Please let me know.

Thanks,

Space for us please.

Rob & Laura

Has anybody repacked a standard Sigma exhaust like this:  https://caterhamparts.co.uk/silencers/4597-silencer-sigma-sva-6.html

How does it come apart?

Removed all rivets around inlet end but it won't come apart - any ideas?

Thanks

Has anybody repacked a standard Sigma exhaust like this:  https://caterhamparts.co.uk/silencers/4597-silencer-sigma-sva-6.html

How does it come apart?

Removed all rivets around inlet end but it won't come apart - any ideas?

Thanks

Boot cover in good condition wanted for 2013 S3 with roadsport cage.

Don't mind if it's standard or low profile.

Anyone swapped to low profile and got a standard one kicking around?

17:00ish Saturday afternoon just at the top of Cromford hill near Black Rock.

well done Rob. I see Ivan also has one, so that is 4 for us I guess?

Laura

well done Ivan. I see Rob J also has one, so that is 4 for us I guess?

Laura

Did anyone manage to book a garage?

logged in a 20:00, zero available!

Laura

Hi Justin,

please add us to the list.

Thanks,

Rob & Laura

Two places for us please Paul.

Rob & Laura.

108mm PCD

FOR SALE

Set of four 13"x6" black & silver Minilite style wheels with used Yokohama A539 tyres.

Wheels are 108PCD, straight and true but have powdercoat flaking in a few places and the polished rims have patches where moisture has got under the lacquer.  The rears of the wheels are hand painted with satin black Hammerite.

These are not wheels for polishers but a refurb would get them sorted.  Please message me for photos as I can't figure out how to add them into this post!

Tyres are 185/60R13 Yokohama A539s, part worn as used for two seasons in LSOC Speed Championship.  All dated 2017, week 30. Tread depth varies between 2.6mm and 5mm across the four tyres.

Ideal for anyone entering Class 1 or Class 2 of the LSOC Speed Championship.

Collection only from Belper area near Derby.

£200 ONO

Looking for a full set of adjustable platforms, must be in excellent condition.

What have you got ?

Now on Ebay: https://www.ebay.co.uk/itm/274110777194

Now on Ebay: https://www.ebay.co.uk/itm/274110771356

I believe it will be a titan with plates. 

Checked over, new oil seals etc by Road & Race Transmissions for the 2017 race season. 2018 LSOC Sprint Championship and a thousand miles or so of road use then replaced with 3.64:1 & 6-speed gearbox.

Not noisy in operation.

BMW 3.91:1 LSD.

Removed from 2013 car, ran as standard open diff from 2013 then had LSD fitted for the 2016 season. Checked over, new oil seals etc by Road & Race Transmissions for the 2017 race season. Did one season of LSOC Speed Championship before being replaced with 3.64:1 LSD and six speed gearbox. Oil changed every year. Mounting cradle not included.  These are over £2100 new from Caterham.

£1000 ono.  Collection only from Belper area in Derbyshire. Please contact me if you want any further information.

Ford Sigma 1600cc Engine Non variable valve timing 125hp

2013 engine used in Academy, Roadsport and Tracksport before being upgraded to Supersport spec for the 2016 season.  Raced in Supersport spec for two seasons and one season in LSOC Speed Championship. Also used on the road, has covered approx 7000 miles. Now returned to 125hp spec with standard cams and fuel injectors fitted. Oil and filter changed at least every other race weekend. Fitted with modified sump baffle plate to reduce the amount of oil breathed into catch tanks.  Standard flywheel, clutch, ECU and engine section of wiring harness included.  The following bits are missing: auxiliary drive belt tensioner unit and a few of the studs to retain the cam belt cover.

£700 ono.  Collection only from Belper area in Derbyshire. Please contact me if you want any further information.

Agree with all the comments above, add our thanks to everyone involved especially Chris for putting in all the effort to organise.

Rob & Laura

Hi Chris, appreciate it's late notice but Laura and I would like to come. Can you please confirm or otherwise?

Thanks,

Rob

I'll have a place please if still available

Thanks,

Rob