Jump to content
Click here if you are having website access problems ×

jenkss1

Member
 View Profile  See their activity

  • Posts

    47

  • Joined

  • Last visited

 Content Type 

Everything posted by jenkss1

  1. jenkss1
    Aeroscreen now sold
  2. jenkss1

    Wheels

    jenkss1 replied to jenkss1's topic in For Sale

    Thanks for the corrections. Details as follows rim width (measured between insides of bead retaining flanges) = 150 PCD = 108 ET = +20
  3. jenkss1

    Wheels

    jenkss1 replied to jenkss1's topic in For Sale

    Hello, the wheels came of a 1998 Caterham Supersport so yes they are "7"s I don't know the offset or PCD, but can measure up if you are interested.
  4. jenkss1

    Wheels

    jenkss1 posted a topic in For Sale

    5 number 13 inch wheels, 7 inch wide. In need of re coating to smarten them up. Stored in Wrexham. Any offers?
  5. jenkss1
    Sold
  6. jenkss1
    Sidescreens now sold. Aeroscreen remains available at £150 plus carriage.
  7. jenkss1
    Photo of side screen and another photo of aero screen fitted to S3 as requested
  8. jenkss1
    Kit comprises engine support frame, manual gear change with housing, and split propshaft. The gear lever and housing were made by Arch to fit into the central tunnel. The split propshaft has a centre bearing and steel packer that bolts on the Caterham gearbox support. There's also the three point flange that slides onto the Hayabusa output shaft. £850 the lot plus carriage.
  9. jenkss1
    Aeroscreen:- manufacturer unknown, but fitted my S3 fine. You’ll need to drill holes in scuttle to take small screws and “k” nuts to secure it. Good condition. Will provide two used SPA side mirrors in GRP if you want them MOG carbon fibre side screens:- originally fitted to CSR, then cut-to suit S3 with notch in bottom surface to fit around roll-cage bolt. Fair condition £350 the lot plus carriage.
  10. jenkss1
    Springs still available. £100 for the lot. Crossplys still available. £30 for the lot
  11. jenkss1
    Two pairs available. One set is unused / undrilled in black grp. £125 plus carriage THIS PAIR NOW SOLD Other set comprises a nearside in black GRP, and an old and tatty offside in silver GRP £65 plus carriage. All the black unused ones are aftermarket, rather than from Caterham.
  12. jenkss1
    Dampers sold, thanks all for your interest
  13. jenkss1
    Purchased March 2018 for my Caterham hillclimb car and used for hillclimbs only until mid 2022 when car went into storage. £2000 plus carriage
  14. jenkss1
    TRS 6 point HANS compatible harness for sale. Made for my Caterham and used for two hillclimbs only. FIA validity to end of 26. £160 plus carriage
  15. jenkss1
  16. jenkss1
    Caterham Hayabusa hillclimb car for sale, either ready to race or as rolling chassis with V5. Current spec. includes 1667cc Hayabusa with 240bhp at wheels, Geartronics paddble shift, Nitron dampers, loads of titanium / carbon bits, and traction / launch. Chassis was built for hillclimbing in 2015 with diff and other stiffening, HANS points. All-up weight = 430kg complete with all fluids. Minor panel damage. £30k. Will split and sell bare rolling chassis for £9k with V5, but without cage / carbon / Ti which are available at extra cost. Only ever used for hillclimbs and transported between events in covered trailer. If interested then please email me jenks.si@btinternet.com
  17. jenkss1
    And the tyres.............. All used and been in the garage for a few years. ZZRs £70 ono the set Pair of fronts 185/55 R13 with between 2 and 4mm tread depth left Pair of rears 215/55 R13 between 2 and 3mm tread depth left Avon Crossply slicks supersoft compound £20 ono the set Pair of fronts 7.0/21.0 - 13 with 2mm tread depth left Pair of rears 9.2/22.0 - 13 with 3mm tread depth left Avon Crossply slicks supersoft compound hand cut by Avon into intermediates £25 ono the set Pair of fronts 7.0/21.0 - 13 with 3mm tread depth left Pair of rears 9.2/22.0 - 13 with 3mm tread depth left Ideally buyer collects from Wrehxam, but could discuss.
  18. jenkss1
    I have the following for sale:- Pair of progressive rear springs each comprising 225lb x 155mm long main spring, + collar + 225 / 250 to 625lb x 100mm long helper spring. New condition £70 the pair Pair of rear springs 110lb x 225mm long. New condition £40 the pair Pair of rear springs 200lb x 300mm long. New condition £40 the pair Pair of front springs 225lb x 175mm long. New condition £40 the pair Pair of front springs for CSR 150lb x 200mm long. Used condition £30 the pair Or £150 the lot. Carriage at cost 07816 514658
  19. jenkss1
    Boot cover for CSR made by Softbits to suit SLR type (full) rollcage. Mohair effect, with poppers fitted. Should fit SV body. £40 plus carriage Please email me if you're interested and I'll send photos. jenks.si@btinternet.com
  20. jenkss1
    NOW SOLD Softbits touring type tunnel bag and tool roll, both in good condition. £45 plus carriage for the two. Please email me if you want photos jenks.si@btinternet.com
  21. jenkss1
    I'm looking for a knackered driveshaft, any condition. It's the splined end at the drive flange that I'm after. Thanks Simon jenks.si@btinternet.com
  22. jenkss1
    For Sale. Combined aluminium radiator and header tank sized for BEC. Scruffy but serviceable. £75 plus carriage. If interested please email me on jenks.si@btinternet.com
  23. jenkss1
    SOLD Elite reverse gearbox for sale suitable for bike engined Caterham. Includes a mounting cage that fits it straight onto the gearbox plate on an S3. Used for two seasons of hillclimbs and hardly used since service by Elite. £440 plus carriage. Please drop an email to jenks.si@btinternet.com if you're interested.
  24. jenkss1
    Anyone have a pair of AP race calipers for the rear end of an S3? If yes then please drop me an email to jenks.si@btinternet.com Thanks Simon
  25. jenkss1
    Ali gear level knob (six speed) = £30 Ali handbrake lever sleeve = £25 Aero petrol filler cap / neck (anodised black) = £75 Mocal type 1 litre ali catch tank (anodised black ) = £55 All plus carriage
×
×
  • Create New...