alcal

Excellent Condition. Was bought new from Caterham by previous owner and had done c. 5000 miles when I had it replaced with a 3.6:1 as it was quite busy with the 4 speed box. Complete in "pig nose". £150 ono

Thanks SLR. I already have one of those but the power source is not what it was.. and I like a gadget. Jonathan - The inflator would be garage based

I'm going to ask Santa for one of these. Should I go for a De Walt one which attaches to the battery I already have with my drill (cost c.£130) or a stand alone one e.g. Ring (cost C.£60)? Thoughts/experiences appreciated.

Thanks all

I have an 8 month old 360S the open BMW diff in which gets too hot to keep my hand on after a drive of say10 miles at c.70mph. C.C. told me that this is not unusual and I wonder if others here have similar experience with or knowledge of this?

Thanks KelvinH. I checked it out but it's the older design and doesn't have the runners. Not sure if the current ones available from Caterham would fit.

A bit of a long shot I know but I'm looking for a single composite or carbon S3 seat in good condition.

As # 619

Handwheels, I assume they straightened it up for you?

Thank you Jonathan. I've downloaded this but am no wiser.

I've just noticed that the top of the steering wheel on my new (factory built) 360 is a few degrees to the left when the front wheels are pointing straight ahead. I could leave this to the 1st service but if it's a simple fix I'll have a go. The (non quick release) boss doesn't want to come off the column. I see there is a splined universal joint adjacent to the steering rack. If I loosen the clamp bolt would the column pull out and go back in easily? (in the correct position). Thanks

FAO Tom_Arundel. Tom I sent you a BM earlier but am not sure if it got through. If not, the mirrors arrived this morning and very many thanks for them. Best wishes, Alan

I need to top this up and can't buy the recommended Motul stuff locally. I have some Comma Super Longlife Red OAT left over from my previous (Sigma) car. Would that be OK? Or Ford Superplus Premium? Thanks

Tom, you have BM.

Jonathan - I'm not sure a photo would help as there is nothing to see. Speedtrip - I'll try that if all else fails. Tom - Mine may be a different design to yours. It's a new car and the quality looks inferior to the the ones on my previous 7. The screw holding the mirror body to the arm goes into a nut held inside the body by a spring and bowl shaped washer. I can't see how to re-combine the 2 main parts without gaining access to the inside of the body. I'm in East Kent and may be in the market for a mirror!