Jump to content
Click here if you are having website access problems ×

Ian Barkley

Account Inactive
  • Posts

    258
  • Joined

  • Last visited

    Never

Reputation

0 Neutral
  1. Had continuing problems with poor idle and stalling engine, tried carb cleaner etc which seemed to help a bit but was variable. Finally fitting a new battery cured the problem! Ian
  2. Recently the rear lights failed, and on investigation both brake/side light bulbs had a hole in the glass! I fitted new bulbs and it appears that the side lights turn on the brake light filament and vice versa... I assume this is an earth problem [or some strange sabotage with a soldering iron] Where do I start to erradicate this problem? Thanks Ian
  3. Cheers Guys... A little ignorance goes a long way... I've just had a birthday and have some beer tokens to spend so I think a digital meter is an urgent purchase. Then I'll try your suggestion, thanks Ian
  4. Thanks jj, bit ignorant on these fancy modern engines... where is this IACV? will an ordinary analogue voltmeter do? and do I connenct it across the terminals of the IACV? 🤔 Ian
  5. Is there a relationship between battery voltage and tickover on the K series? My 7 has had a very variable tickover for a while, sometimes working OK, others stalling at every opportunity unless duditious heel & toeing was used to keep the engine revving. I had to fit a new battery and it started ticking over perfectly! One exception only when I had been stuck in stop/go traffic for a considerable time, immediately prior to parking for the day, when I set off for home [presumably the battery was a bit low on charge] the lumpy tickover returned until I got on the open road for half an hour - charging the battery - then running sweetly again... Ian
  6. Thanks I'll give it a try, the skip should be gone tomorrow... Cheers Ian
  7. RJ it is a K series, I've tried the inertia switch but I'll try the fuses, thanks [i'm a bit scared of injector systems, and don't know what to do with them] Thanks Ian
  8. Any thoughts? Been busy since I got back from France a few weeks ago 3000miles to Provance, La Foie and back, put the car in the garage and it will not fire on turn over... I've charged the battery and the starter is turning it over OK. There seems to be petrol in the tank but not a squeek! I've got a skip at the end of the drive but would like to get it working for the week end. Ian
  9. Thanks Norm, I've disconnected the cable to the valve and that allows more movement which turns it off completely. Means diving under the bonnet to turn it on but hey, it's summer! Still thinking about the icecubes though... Ian
  10. Not really time to strip out the engine etc Norman, with work getting in the way. Setting off to France in a couple of weeks... I'll have a fiddle with the valve first and see if I can turn if off more fully. [still like the idea of the ice cubes!] Next problem is the starter not turning over when its hot... wires... solonoid...relay... Do you think it'll be warm in Provance and the Loire Vally in the next few week? Ian
  11. What with hot footwells et al and a heater system which never fully turns off the hot water. I was wondering if I bypassed the heater with a short piece of heater hose and possibly put ice cubes in the space above the heater matrix, with the blower on full on... would this make hot weather running a delight? There could be the bonus of cold water dripping into the footwell! Ian
  12. Stephen I'm after a pair of chrome 7" front rims only and would be very interested if you end up with a surplus? Thanks Ian
  13. Thanks John I'll have a look, I don't understand these 'modern' engines at all. Cheers Ian
  14. The tickover has been unreliable for a while, it seems since the supersport cam was fitted, cutting out when stopping at lights etc. and even when held a little fast on the throttle, the revs rise and fall spontaneously. Sometimes it runs absolutely perfectly completing a journey with no problems at all. I have tried pumping the accelorator 5 times with the ignition on but without the engine running, I have also used carboretta [spelling?] cleaner in the little plasticky bit [at the top of the engine which has a pipe running from the air cleaner fitting bit] as reccomended. It still seems ok sometimes and rubbish at others and it would be nice to sort it before this summers grande tour. Any suggestions please Ian
×
×
  • Create New...