DDubya

Thank John. I'll look on CC I'm already registered. best regards

Thanks for the advice. Rivets and stud bases arrived today. I spoke to Tony at Caterham parts and he posted them for a quid. John V, positioning them IS the next challenge so if you have the relevant page of the Assy. Guide it would be appreciated. Danny

Six quid for parts, 16.80 to ship Anyone live near Dartfor to collect for me? Danny

Thanks JK and Steve. The Tonneau has the fittings attached so it is for the body. The Socket base and rivet look the right parts. I think on my last seven that the two centre ones on the Scuttle were self tappered. I assume the C/S rivets fit a standard rivet gun? Danny

I bought a second hand Tonneau cover, however there are no Stud sockets fitted to the body of my S3. Both SBFS and Caterham have a plethora of studs and fixings. QQuestion is which is the right one for self tapping/riveting to the body...This one? http://caterhamparts.co.uk/product.php?id_product=310 Also is it best to riven or self tap Danny

I've been looking for a Removed. First Dibs please!

RiF screens were supplied with a length of rubber seal, around an inch wide with a bead on one side. This was bonded with EvoStik or similar contact adhesive so that is formed a seal with the Scuttle. Question. Anyone know of a supplier of this rubber extrusion as the one on my screen, which was purchased secondhand, needs replacing. Thanks Danny

Nice Car

Spotted Saturday 21st around lunchtime on Seafront danny

Steve Give Simon a call at Brooke Kensington, he can put the word out. Danny

Hi John have already sent an email after she seeion FB. Can I have first dibs please danny

Sold to John Hi John, thanks. Can you send me you email address please to dannywoolard@hotmail.com will send pictures when I land tomorrow and will deliver the wheels to Paul on Saturday. Danny

Hi John. Yes they are. My mobile is 07880 007415 but + 5 hours at the moment. Danny

2 off 7-20 13" part worn slicks (suit 8" wheels) £30.00 pair BM for pictures

Set of 4 13" x 6" KN Minator style wheels, black centres, Yoko A539's with 4-5 mm tread. 1 wheel has a minor scuff but otherwise very good condition and suitable for track or road. Not suitable for use with big brakes as caliper fouls (could be Dremled). Suit De-dion car. £200.00 set BM me for pictures Danny Edited by - DDubya on 20 Sep 2014 16:13:51