Grindrod

On 23/03/2024 at 18:35, Grindrod said:

Thanks

I will take a look

Look ok but located in London 

Thanks

I will take a look

Hi

Wanted Half doors for S3 ( Not carbon or Carbon Vinyl )

Am located in North West so would prefer to view and pick up from this location.

Thank you

Although I have not been out in 7 ( off road due to weather ) I have bought this kit ( along with shims for fitting mirrors to my aero screen ) . It is of very good quality .

Would be interested 

thanks

Oxted supply a kit ; the plastic back , bit of foam and some zip ties ; £61 

must cost £1 to produce .

so , looking for a used / discarded one first

Plastic back plate for standar s3 seat please.

doesn’t need to be new just complete

many thanks

Hi , re the boot bag ; the ad mentions 4” deep . Does it expand deeper ?

if that makes sense .

thanks

Hi

thats interesting ; ECU mapping . I notice you mentioned you had a new ECU .

I believe you can also have the original ECU mapped and can make a difference to engine characteristics . 

The transmission clunk isn't excessive , just annoying.

Thanks

Paul

Again , thanks to all.

Seems to be a process of elimination until i can locate the culprit.

Very acute judging by the way mine reacts to opening the fridge door

No LSD , as far as I know .

Thanks to all for your pointers.

Do they all do this ;

Accelerating / decelerating ; I experience slight clunk/ snatch from somewhere along the drive train .

Other than annoying , doesn't seem to affect performance .

Is there a method of checking what this might be /

Or do they all do this ?

Car is 2003 1.6 K Seies

Many thanks

Looking for suitable dog cage for my 7

looking through back issues of Low Flying ; 

June 2010 member Andy Wells produced / made one and looked quite good.

does anyone have anything similar ?

Thanks

Thank you all for all your replies .

Andrew , I will have a look at your technical articles

Has anyone experience of mapping ; original MEMS 3 for K series ?

There was an article in Low flying ; 2010 hi lighting a firm by name of Z and F

Not sure if about any more as cant find them on internet

Does anyone else offer this service /

Not looking for power gains , just improved throttle response , better idling

Cheers

Wanted knee trim panels ( both sides ) please

for s3

Suit 2003 model 

Thank you

Hi 

maybe worth viewing the reply I received Re Throttle bodies ; Engine management system for a crossflow.

maybe worth considering.

thanks

Thanks for the reply/ info.

Hi , as a matter of interest; Is a throttle body conversion to a traditional carb fed crossflow a realistic / worthwhile venture . Advantages ?

many thanks