Took the rocker cover off and found the timing chain is loose! Need to remove the crankshaft pulley any ideas remove starter and lever the ring gear? or impact gun?
Started the engine today to record noise, getting a more mechanical sound, think it’s timing chain area drivers side, could be the tensioner / rubbing strip will have a look by removing the rocker cover
Tried to upload a video but too large!
I will record the noise and post tomorrow, did a check with the screwdriver as a thought it might be the belt tensioner but it was ok, also checked all the plugs were tight.
Hi
my Duartec seems to making a top end noise, have been advised it might be a lifter. Mechanic friend said do a Wynn’s engine flush to see if this clears it any thoughts appreciated.