callumskeat
-
Posts
99 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by callumskeat
-
Hi Folks, Does anyone know where I might source eccles brackets and mirrors. Some help would be most appreciated. Best and thank you. Callum
-
Folks, My user manual does not actually give the tyre pressures for my 360R. It’s got ZZS tyres. Can someone help please? Regards Callum
-
Changing Front Wheel and the scissor jacking point?
callumskeat replied to callumskeat's topic in TechTalk
Folks, Many Thanks, Just what I needed. Regards callum -
Folks, Where do I jack on the wishbone for changing a front wheel using a scissor jack, I’ve only ever used a trolley jack before. A photo would be really helpful, I do not find the handbook clear enough. I’m thinking changing wheels en route to Tuscany this summer. Grateful for some advice? regards Callum
-
Hi Folks, Has anyone got any wizard ideas on how to tone down the indicator noise on my Seven; 2 year old model with the really annoying indicator sound? Regards Callum
-
Folks, Any chance someone could advise me on removing the rear brake pads on my 2 year old Seven? A photo would be great? Regards Callum
-
Hi Toby, My apologies just trawled for Laon and found this email. Yes we were there and may go next year? Rumour has it the club has been invited? Do you know anything about that? Regards Callum
-
Hi Folks, Does anyone know what the generic code/part number is for the air filter for the Duratec engine on the Seven 360R. £150 from Caterham seems a little steep. Regards Callum
-
Hi Folks, i have just built a 360R but did not specify a quick release mono. I would be grateful for a boss recommendation that will fit the momo that it came with? Grateful for some wisdom here? Regards Callum
-
Thank you. It does fur up. Better find some now!
-
Hi Folks, Should I use deionised water for my Duratec's coolant mix? Regards Calum
-
Again Many Thanks Callum
-
Folks, Many Thanks for all the helpful comments; simply invaluable. This is a really interesting task, slower than I thought, but fun. Can I ask a dumb question? What is a big head and is there a website for them? Regards Callum
-
Paul, very helpful. I'll give Derek at Catwrham a call. Regards Callum
-
Many thanks Regards Callum
-
Hi Folks, i am building a 360R and am struggling to locate the cycle wings on the wing stays. The build manual talks of pre-drilled holes, which my stays do not have. Can anyone let me know the measurement between the leading edge of the cycle wing and the bolts please? Very grateful for some help here? Thank you Callum
-
Tom, Huge thanks. Best Callum
-
Hi Folks, I am building a 360R with a duratec engine and mazda 5 speed gearbox. I am struggling with the arrangement for the cooling system hoses. The car has a heater and wet sump. The assembly manual seems out of date and the variuos blogs not quite there either. Any help very gratfeully received? Regards Callum
-
Hi Folks, I live bewteen Swindon and Oxfrod and am building a 360R. I need an engine hoist as nw at the add engine and gearbox stage. Any advice as to where I might best go to get a hoist? Gratfeul for any wisdom? Regards Callum
-
Hi Marcus, Many Thanks. And this works well? I assume a breaker bar would provide the lever arm? The price is attracive at £35.31. Regards Callum
-
Thank you all for the help here; hugely apprecatied and much learned. Rgds Callum
-
Many Thanks Rgds Callum
-
41mm Rgds Callum
-
Hi, Many Thanks for the suggestion. Regards Callum
-
Hi Folks, I am shortly to take delivery of a 360R for self build. Reading the assembly guide it details the need for a 274 Nm torque wrench to assemble the rear hub nuts. Can anyone suggest where I might hire/borrow such an item. Not needed for a little while, but it would be helpful to know? I live between Swindon and Oxford in Faringdon. Regards Callum
