Dave connors

I am after a 13 x 6 8 spoke anthracite wheel to use as a spare if anyone has one knocking around.

Dave

I'm after a couple of parts for a spare wheel carrier for S3 metric chassis 

Spare wheel bolt and spacer sleeve Caterham part number 77323A

Spare wheel fixing boss Caterham part number 76310

Regards Dave

Hi

We are over here for a few days going back Friday drove the tt course today.

Dave

A sbfs short shower cap the photo shows it fitted to a S3 with the FAI roll bar not sure if it was made for this but seems to fit OK.

£60 plus postage if required

Spoken to redline and it should be fitted with the smaller master cylinder so I've ordered one of those not sure why they went to the smaller bore 

Anyone know the best place to get a seal repair kit for the .7" clutch master cylinder (Girling 64676310) 2011 sigma engined car.

Yes fixed cam

That's the bolt that fitted ny 2011sigma 2035528 part number 

The ford bolt number is 2035528 I have a spare if you are struggling to get one, if I remember correctly there are 2 different sizes fitted to the sigma engine

Hi

I'll take this please

I think 36E306A is the part you are after on the Caterham site

I must have a one off switch can't sand anything off as all the other keys I've bought are too small on the locating diameter the graystones key is the same 1mm too small looks like replacing the whole switch

Is there everything I need to use them included 

PM sent

I've bought a few from different suppliers non are this size, the original switch was from demon tweeks so a decent supplier but they were unable to help looks like a new switch if I want a spare key.

I had the same with mine but the opposite way around,  the diameter of the barrel I have is bigger than others I have bought as spares,  I have a boxfull of keys that don't engage properly the only solution is to change the switch if I want a spare key to fit. If anyone has a spare key with a diameter of around 11.8mm it would be appreciated 

I have for sale a set of front and rear springs and dampers off my supersport not sure how old they are as they came with the car when I bought it, not cosmetically the best but have no leaks, no adjustable platforms with the rears not sure what's a fair price £220 ? Let me know if you need any more pics

It's organised by the bromyard speed festival ther is a wide range of sports and classic cars turn up similar to the shelsley walsh breakfast club and cars in the valley which are well worth a visit

That wasme just been to the Bromyard breakfast club at Stockton Bury with a few other members great morning out but it was getting a bit warm on the drive back.

Cheers Brian I will give them ring

Adam 

Looking at my receipt from KMS there is another part number 0258986777

I've got supersport dampers at the moment with 250lb springs find them too stiff for the road wanted to try standard dampers can't just change the springs as the dampers are different 

Looking for a pair of standard front dampers/springs for wide track (75530AWS) ideally with the 170lb springs 

Does anyone have a wiring diagram for a 2011 sigma fixed cam car, it's ex academy racer if that makes any difference. 

Has anyone got a s3 sigma silencer I need one for this weekend the weld has failed  on mine