KelvinH
-
Posts
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by KelvinH
-
-
I am selling my very clean PRG open trailer as I have purchased a covered trailer.
Spec as follows:
Gross weight = 2000kg
Unladen weight = 510kg approx
Load capacity = 1490kg approx
Bed length = 365cm
Bed width = 190cm
I am not sure of the age of the trailer but have owned it for 12 months to transport my 620S SV to trackdays.
The trailer tows very well, is reliable and has good tyres, its features include;
Extra long ramps (2.5metres) for loading low cars.
Manual tow hitch,
Full length deck.
Spare wheel.
Bolt on wheel chocs.
Barrel lock with 2 keys.
7 pin connector.
When i bought the trailer I replaced the complete jockey wheel, the winch belt & the breakaway cable and the rubber bellows. I then took it to PRG who serviced it on 23/06/2020.
Located on the Cheshire/Staffordshire border
-
I noticed that MSV are selling spectator tickets for events on the weekend before Cadwell. Is there any update on the spectator rules for our trackday?
-
Very intersted in the trailer
When could i come and pick it up and how do you want payment
Regards
Kelvin
-
I would like to buy the harness pads please
-
Not just me then!
Had exactly the same problem after i bought my 620s privately.
Clutch worked perfectly for about 10 miles then progressively failed until the pedal went flat to the floor.
After parking up for about half an hour and letting the car cool down, the clutch started working again ... and then progressively got worse as the car heated up. After bleeding the system there was a slight improvement but the problem continued.
Like you i thought it was heat related as the removable pedal box cover was getting very hot, so i covered it in heat reflective tape. This resulted in an improvement but after letting the car stand for a couple of weeks the pedal was progressively getting softer.
I eventually solved the problem by replacing the clutch fluid master cylinder cap and the problem was fixed, It was probably a problem with the seal - so maybe it was an issue with overheating that resulted in a damaged seal.
Anyway three years later and the problem has not returned. As a side note: covering the pedal box cover with heat reflective tape greatly reduced the heat transfer into the cab.
Hope this helps
-
Thanks for all the advice.
A member has sold me his mirror, problem solved
-
My problem is that the bracket is well & truly stuck to the glass (possibly with a superglue), so i have popped the mirror off the bracket and so i am looking for a mirror i can pop back on in its place.
I worry that if i remove the bracket it may damage the windscreen. Looks like i will have to order a like for like mirror from Caterham.
Thanks for all the replies
-
Thanks for the info.
It was the mirror glass that I smashed.
Any recommendations for pattern mirror replacements?
-
Screen mounted rear view mirror required to replace the one I ironically broke while making a safety container to protect the windscreen!
I assume they are all the same - my car is a 2017 620s SV.
Thanks for looking.
-
Please supply payment details
-
Yes please.
-
You could try JP Exhausts exhausts in Congleton. Check out their website for some pretty exotic work they do. Top quality at a much lower price than i was expecting. They did my exhausts for my 620s.
-
Half sidescreens/half doors to fit 2017 620 SV - would cosider R/H only.
Thanks for looking
-
Hi
Very interested in wheels. Need a spare set for track days
How much do you want & where are you based please ?
Regards
Kel
-
Thanks for the advice. Local Caterham dealer is getting back to me tomorrow.
Not had a lot of luck with this as it failed the MOT on March 1st at a local station, so booked it in at main dealer who could not fit it in for 3 weeks. Day after it went in they closed for Covid. When they re-openned they had to wait for Caterham to open for ECU info as they changed the Lambda sensor and now they have identified the car has no cat!
-
I bought my 2017 620s with a custom exhaust which i found out at its 1st MOT did not have a catalyst!
System is standard from the engine into the collector, box but is then in 1 piece all the way through to the custom track day rear box.
Need an exhaust with Cat converter to get through the MOT. Would consider just the side pipe as a temporary fix.
Help appreciated
-
Apollos wanted with or without tyres
2 x 6x13
2 x 8x13
Prefer black diamond cut but would consider silver
-
Spa Carbon mirrors wanted LH & RH, flat or convex for fitting onto aeroscreen..
-
Donington seven club track day available Monday 4th October
in For Sale
Posted
I am not able to make the trackday so a space is now available. Contact Simon Maitland at trackdays@lotus7.club.