Jump to content
Click here if you are having website access problems ×

Richard_Perrett

Member
 View Profile  See their activity

  • Posts

    11

  • Joined

  • Last visited

 Content Type 

Everything posted by Richard_Perrett

  1. Richard_Perrett
    Thanks James, I had read John's blog and understood that the MBE broadcast protocol broadcast by default without doing anything in EasyMap to set it up, but I'll look into that now as I already have a cable.
  2. Richard_Perrett
    I am wondering if anyone could give me some advice on how to get RaceChrono to work with a OBDLinkLX Bluetooth OBD2 device? i have seen some Youtube video of a Duratec with RPM and Throttle displayed so I'm assuming it's possible somehow. I can't get it to connect to the ECU so far, the bluetooth is fine.
  3. Richard_Perrett
    I'd like the centre mirror please.
  4. Richard_Perrett
    Hi Ged, PM sent.
  5. Richard_Perrett
    2013 BMW Titan LSD for sale from a Supersport R with 7k miles. I put it in to SP Components to be changed for a Tracsport in the belief it had failed (no pre-load). Steve Perks advises it just has a cracked belville spring a cheap fix and that the carbon plates are still in good condition (these early carbon plated ones it seems have better durability). It's currently at SP Components where Steve can separately quote to provide repair / upgrade services and installation in your own diff housing. He advised it was probably worth around £400, so I'm open to offers...
  6. Richard_Perrett
    PM sent about rear lights and clear lenses
  7. Richard_Perrett
    I don't recall looking at that. I just programmed the low and high points of the lights coming on, enabled the stall warning and that was it. I can't see the LCD display easily when driving anyway so not sure how much use it would be.
  8. Richard_Perrett
    Hi Andy, Did you have any joy with setting to 1 cyl? I have the stall warning working fine on mine.
  9. Richard_Perrett
    I had to set mine to 1 cyl to get it to work. 2013 Duratec Supersport R. There was also a spare connector off the wiring loom neer the tacho which had the power and Speedo conductors. I cut the connector off and used those with a 5a connector block.
  10. Richard_Perrett
    Thanks to you all for the excellent information. Much appreciated!
  11. Richard_Perrett
    Hi All,, I bought a 2013 Supersport R last year with the 420 engine upgrade and Roller Barrel Throttle Bodies. Factory upgrade by CC. I'm wondering if anyone could advise the RPM's for Rev Limit, Max Power and Max Torque? I have just fitted DRE shift lights and looking for some insight to program them. Many thanks
×
×
  • Create New...