jointcbvirginmedia.com

Yes, interested.

I know it's  not Caterham related, but I know that some of you also have motorcycles.

My son needs two 3 ohm two plug ignition coil

for his GSXR 400 GK76A

Many thanks 

Jon 

Can anyone recommend a company, or individual who could respray both rear wings, and also fit stone chip protector.

In the West Midlands.

Thanks

Jon 

Hi got one .

Its never got wet. As new condition.

£50.00 plus postage if you want it.

Best regards

Jon 

Hi,

I’ve got a 1.4 K series. Every now and then regardless of the engine being cold or hot the starter motor

plays up.  When I press the start button, it just makes a whining noise.

If I turn the ignition switched off get out and and rock the Caterham back and forth in gear.

Then then get back in press the starter button with the ignition on, the engine will start normally.   

It has got a lightened flywheel fitted and covered about 4K miles from new.

Any advise would be appreciated.

Regards

Jon

Hi Jonathan,

Road but do like to give it some stick !

For sale GBS Zero Half Hood (Standard Chassis) Softbits 

As new never been wet.

£150 plus postage 

Jon 

Some advice please I’m using Castrol Edge TITANIUM 5W-40 fully synthetic in my 1.4 K engine.

Should I be using semi synthetic oil instead of Fully ?

Thanks

Jon

 Newbie to other newbie’s K series.

Good week for the Caterham,

I’m so impressed with the knowledge and technical expertise I’ve encountered so far.

Thank goodness for word-of-mouth and the forums.

Following on from DVA installing the K01 kit which took the Caterham to another level in performance.  And Nick Potter converting the wheels from 14” to 13” .

6” Fronts and 8” rear Avon ZZS tyre's which has improved the handling by a phenomenal margin.

19 March

New Powerspeed  4-2-1 exhaust fitted by Fast Road Conversions group buy excellent job very impressed with the exhaust, and the installation.  They did a first class job. Sounds wonderful and mid-range torque was much improved.

20th March.  

Re-mapped by Kmaps Mark, did a fantastic job engine running so much smoother.  And performance much improved again! Can highly recommend.  Worth every penny.

Mark, also recommended that I use higher–octane fuel example Shell V-power in future.

Booked in again with DVApower 24th March to have. New oil pressure sender, removal of foam sump baffle and Dave’s modified sump gasket fitted.  With oil changed to Castrol Edge full synthetic 5W/40 and a new oil filter. Also new K&N air filter fitted.

New 4 point Caterham harness fitted by Nick Potter.

JCB

Probably being over cautious got the standard plastic dashboard.

Want to install a time clock in the dash.  Has anyone successfully done this?

And if so best why to cut the 52mm hole out.

Thanks

JCB

Tim,

Thank you for the reassurance.

My wife and I are in the process of planning a trip from Calais to Lake Como.  In Late May early June for 8-10 days.

Route planning in progress, but want to try the car out on the Oberalpstasse & the Via Alpsu on route.

Also need to find out about a tag, for automatic payment of motorway tolls and if the tag will work in the Caterham being so low and having a flat window screen. But going to do my best to avoid the motorways if possible

My insurance is due for renewal in May.  So going to make sure we have full European breakdown cover.

Jon

Hi Dave,

I’m a newbie got the Caterham in May last year my wife and I toured the west coast of Ireland in June.  We are both keen on going to Europe but I’m apprehensive about having no support on my first visit with the Car.

Can you please let me have the dates to book ferries and hotel’s, as this might be an option for us.

Or advise if someone has to drop out

Best regards

Jon

Newbi.

Some advise please

Want to undertake a oil and filter change on my Caterham 7 1.4 k series

I have a trolley jack and can get 4-axel stands just need some guidance on

Best position for trolley jack front and rear of car and best position for axel stands under each corner.

Also quantity of oil needed.

Thanks Jon

Hi Ian,

That's very kind of you. I've got the Caterham booked in with Nick late next week going to cost more than I expected but I know Nick will do a great job.

My son works for me so he going to pick me up in the company van.

But again very kind of you.

All the best

Jon

Hi,

Thank you for all the responses.

Sent the photos over to Nick Potter, who’s going to give me a quote.

Don't want to go through insurance.

Looking at it myself no damage to the skin but the rivnuts have pulled out

Yes manage to stay on the road.

Only just had it performance tuned by Dave Andrews on the 20 Oct

All the best

Jon

A muntjac deer collided with my rear cycle wing at 60 mph ish

On a country lane.

The wing became detached and split in the centre which allowed the rear light assemble to make contact with the rear of the car and put a small dent in the body work about the size of a 50p

Can anyone recommend a repair specialist I’m in Birmingham.

Need new wing etc.

Hi I'm a newbie,

Got my Caterham 7 1.4 K in May 2018 only 2k on the clock

Just had the wheels converted from 14" to 13"  by Nick Potter

Got the Caterham booked in with Dave Andrews in October to have the K01 kit fitted

Which should give an extra 8-10 BHP

Dave, did say that a a decent 4-2-1 would give and improvement.

And the system below ticks all the boxes whats the drop dead date for the group buy ?

And whats your opinion on on having or not having a CAT fitted.

Full 4 2 1 System with integrated CAT = £1680 inc VAT       (Discounted price £1512)

Fully polished = £200 Plus VAT

Fitting =£200 Plus VAT

Best regards

Jon

Paul / Ian

4x wheels

Avon Z3 185/60R14

14" Classic Minilite

For some reason and can not paste photo to coment.

But if you e-mail me I can send a photo if required

jointcb@virginmedia.com

I can e-mail a picture to anyone who interested

£85.00 per complete wheel.

Jon

Hi Dave,

It’s a Caerbont speedo 0-160 MPH

I spoke with Ian this morning the technician at Caerbont who’s been very helpful and hasn’t charged me highly recommended him.

When I changed the wheels from 14” to 13”

I recalibrated the speedo using the PPU code but this code was for a wheel pulse frequency

Not a gearbox pick up which my Caterham has.

He has now inputted a different code which should sort the problem out he’s posting the speedo back to me today should have it tomorrow hopefully all should be sorted.

Might have to make a minor adjustment if out by more than 10% against my sat nav.

Thank you for sparing the time to help, much appreciated

Jon

I have got the Caebort speedo programming codes

The PPU code for my wheel is 039440 but I think that code only works if the rear wheels link to the speedometer

Mine is linked to the gearbox.

But thank you for your help.

Jon

Just had my wheels changed from 14' to 13'

Avon ZZS 185/55 R13 fronts & 215/55 R13 rears

Caerbont speedo 0 - 160 MPH 

Does anyone know the correct PPU code the pick up is via a ford sierra gearbox electronic sensor

The speedo has been checked by the Caerbont its working correctly.

Any help would be appreciated.

Jon