Russ P
-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by Russ P
-
-
Thanks Guys, Your expertise and your willingness to help, re advice on tyres, are much appreciated. Russ
-
I have a 7 Supersprint with approx 140 bhp at the flywheel. (tuned 1700 crossflow).
At present it has standard road tyres, Uniroyal Rain Expert, which are 185/60/R14.
Could someone recommend suitable tyres for track days and sprinting.
Many Thanks,
Russ
-
Can someone advise me on which tyres are best for track days and or race? Need to be road legal. For a Supersprint with approx 140bhp and 14 in wheels......Thanks, Russ
-
Planning to do track days....7 club one at Castle Combe etc.....What measure of decibels should I expect from a Supersprint with a crossflow engine tuned by Vulcan to 140bhp? I plan to get it measured at Thruxton on 5 March, but anticipate problems...I think I'll be asking for advice on how to make it quieter....will let you know.
Russ
-
Hi All,
I have a Ford 1600 x flow, wet sump.
Where do I get an Apollo tank, and would it be straightforward to fit by my local garage engineer? 'scuse my ignorance.
Russ P
-
I also need tyres for 14 in wheels. Looking at the MSA Lists 1 a and 1b, (so I could do Gurston Hillclimb events, and maybe Castle Combe Sprints).
Thinking that R888r's are a bit extreme dry, Would appreciate advice.
Russ P
-
Still needing advice... Does anyone have knowledge re suitability for trackday hillclimb, of: Continental Prem contact 5, or
Vredestein Sportrac 5? As they are available in 14 in
Russ P
-
Many thanks for all that info, Richard.
Russ
-
Thanks Richard. It is De dion ..Thanks for tip re Minators. Next questions...sorry about this...what size wheels if go for 13inch, and what profile tyres?
Russ P
-
So next decision, may be to take Mike's advice and go for 13in wheels with ZZS's ...so which wheels? Minilites?
Russ P
-
Hi Mike,
Thanks for pointing that out....my mistake,,again! I was reading 11.9.1.5, when in fact 11.6.2 actually applies..as you said. I'm pleased I asked the question.
Will try for Avon ZZS, as you recommended, hopefully available in 185/60/14
Thanks again,
Russ
-
Hi Mike,
Thanks for pointing that out....my mistake,,again! I was reading 11.9.1.5, when in fact 11.6.2 actually applies..as you said. I'm pleased I asked the question.
Will try for Avon ZZS, as you recommended, hopefully available in 185/60/14
Thanks again,
Russ
-
Hi Mike,
Thanks for pointing that out....my mistake,,again! I was reading 11.9.1.5, when in fact 11.6.2 actually applies..as you said. I'm pleased I asked the question.
Will try for Avon ZZS, as you recommended, hopefully available in 185/60/14
Thanks again,
Russ
-
Sorry my mistake, should have said, MSA List 1A. To be included in Specialist Production Class. size will be 185/60/R14
But thanks for the useful info anyway.
Russ P
-
Hi All,
I am a new member, with some racing experience, and have just bought my first Seven, a Series 3 with a 124 bhp crossflow motor.
I need to change the tyres for a set in the MSA List 1, (to comply with hillclimb and sprint regs, ) for the
Specialist Production Class. Can someone give me advice as to which tyres I should buy, to best suit the car, please?
Many Thanks,
Russ P
x-flow valve clearance with kent 234 cam
in TechTalk
Posted
I have 1700 crossflow tuned to about 136 bhp. Having trouble with too much noise! ie about 98 dba static test.
Can someone advise me how I can get the noise level down, ideally I would like under 90 dba for Thruxton, but any reduction would be a help. It has the standard side exit exhaust.
Many thanks for any help,
Russ