adrianwindo

Now on eBay; grab a bargain

270mm leather wheel Usable but could do with refurbishment £65 posted 2nd class

Its a very good idea, i shall try that as otherwise all is good cheers

Hi the rubber gaiters on the handbrake cable where it attaches to the disc is perished on my car. Is this an issue for MOT? Looks like these parts get replaced along with the complete cable, anyone know what replacement cable is required? thank you

Many thanks for all your ideas. I've managed to remove the sensor and swapped exhaust systems, putting back the catalytic converter all ready for the MOT.

Hi All Does anyone know which Lambda sensor is required in the R400D and the cable length? Any tips for removing one? Which socket size is required or does a spanner work just as well? many thanks

The replacement rocker switches were identical, yes i can see that the covers can be swapped. Anyway, 4 new switches installed. I shall get a few spare bulbs in case others fail Many thanks to everyone for their help

I wont be impressed if they are different.....shall end up changing all of them. Bought 4 so far

I haven't checked to see if the connections have come adrift - i will do that, just assumed they had failed

I need to replace a couple of the rocker switches in the dash as the lights don't function (e.g. brake test light) . Anyone had a go at this, do you push from the back and they pop out. Do you have to be brave and push pretty hard as they seem very tight? thanks

NOW SOLD

The dampers and shocks have been taken from a 2007 R400 so WIDE TRACK DE-DION (POST`96) with the lower de-dion tube attachment at the rear. They have completer a bit under 11k miles £200 plus postage or collection from Wiltshire

PM sent as i wish to buy the Caterham Red starter button (76-9410/439088) £10

That was fast!

Hi Hi im interested in the half hood; how old is it and has it been used extensively? All zips and poppers ok? many thanks